Document
OM1805N2M OM1812N2M
OM1815N2M
HERMETIC SURFACE MOUNT FIXED VOLTAGE POSITIVE REGULATORS APPROVED TO DESC DRAWINGS
LCC 20 Fixed Voltage, Precision Positive Regulators In Hermetic Surface Mount Package
FEATURES
• • • • • • Hermetic Surface Mount Package Output Voltages: +5V, +12V, +15V Output Voltages Set Internally To ±1% Built-In Thermal Overload Protection Short Circuit Current Limiting Hi-Rel Screening Available
DESCRIPTION
These positive regulators are supplied in a hermetically sealed surface mount package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over .5 amps of output current. These units feature internally trimmed output voltages to ±1% of nominal voltage. Standard voltages are +5V, +12V, and +15V. These units are ideally suited for Military applications where a hermetic surface mount package is required.
www.DataSheet4U.com
PART NUMBER DESIGNATOR
Standard Military Drawing Number 5962-8778201 2X 5962-8777601 2X 5962-8855301 2X Omnirel Part Number OM1805N2M OM1812N2M OM1815N2M
3.5
4 11 R0
3.5 - 33
OM1805N2M - OM1815N2M
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Typical Power/Thermal Charateristics: Rated Power @ 25° C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1040 mW Thermal Resistance θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20°C/W θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120°C/W a ELECTRICAL CHARACTERISTICS 5 Volt
Parameter Output Voltage Symbol VOUT VIN = 10V, Io = 100mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified) Min. 4.92 Max. 5.08 5.15 Unit V V
Test Conditions TA = 25°C VIN = 7.5V to 20V IO = 5mA to 500 mA, P < 2 W
•
4.85
Line Regulation (Note 1) (Note 4)
VRLINE
VIN = 7.5V to 20V
5
mV mV mV mV mV mV mA mA mA
•
VIN = 8.0V to 12V
12 4
•
Load Regulation (Note 1) Standby Current Drain ISCD ∆ISCD (Line) ∆ISCD (Load) VDO IO (pk) IDS ∆VIN ∆VOUT Output Noise Voltage (Note 3) Long Term Stability (Note 3) ∆VOUT ∆t TA = 25°C, t = 1000 hrs. NO TA = 25°C, ∆VOUT = 100mV, IO = 500mA TA = 25°C VIN = 35V 0.5 IO = 5mA to 500mA VIN = 7.5V to 20V VRLOAD IO = 5mA to 500 mA
10 25
• • • •
50 6 6.5 0.8
Standby Current Drain Change With Line Standby Current Drain Change With Load Dropout Voltage Peak Output Current Short Circuit Current (Note 2) Ripple Rejection
0.5
mA
2.5 1.7 0.7
V A A A dB dB
•
f =120 Hz, ∆VIN = 1.