TB6560FG

TB6560HQ/FG Preliminary TOSHIBA BiCD Integrated Circuit Silicon Monolithic TB6560HQ,TB6560FG PWM Chopper-Type bipolar Stepping Motor Driver IC The TB6560HQ/FG is a PWM chopper-type sinusoidal micro-step bipolar stepping motor driver IC. It supports both 2-phase/1-2-phase/W1-2-phase/2W1-2-phase excitation mode and forward/reverse mode and is capable of low-vibration, high-performance drive of 2-phase bipolar type stepping motors using only a clock signal. TB6560HQ Features www.DataSheet4U.com TB6560FG Single-chip bipolar sinusoidal micro-step stepping motor driver Uses high withstand voltage BiCD process: Ron (upper  lower) = 0.6 Ω (typ.) Forward and reverse rotation control available Selectable phase drive (2, 1-2, W1-2, and 2W1-2) High output withstand voltage: VCEO = 40 V High output current: IOUT = HQ: 3.5 A (peak) FG: 2.5 A (peak) Packages: HZIP25-P-1.27/HQFP64-P-1010-0.50 Built-in input pull-down resistor: 100 kΩ (typ.) Output monitor pin equipped: MO current (IMO (max) = 1 mA) Equipped with reset and enable pins Built-in overheat protection circuit Weight: HZIP25-P-1.27: 9.86 g (typ.) HQFP64-P-1010-0.50: 0.26 g (typ.) The TB6560HQ/FG is a Pb-free product. The following conditions apply to solderability: *Solderability 1. Use of Sn-63Pb solder bath *solder bath temperature = 230°C *dipping time = 5 seconds *number of times = once *use of R-type flux 2. Use of Sn-3.0Ag-0.5Cu solder bath *solder bath temperature = 245°C *dipping time = 5 sec...