DatasheetsPDF.com

TGA4953-SCC-SL Dataheets PDF



Part Number TGA4953-SCC-SL
Manufacturers TriQuint Semiconductor
Logo TriQuint Semiconductor
Description Optical Modulator Driver
Datasheet TGA4953-SCC-SL DatasheetTGA4953-SCC-SL Datasheet (PDF)

Product Datasheet April 11, 2006 9.9-12.5Gb/s Optical Modulator Driver OC-192 Metro and Long Haul Applications Surface Mount Package TGA4953-SCC-SL Key Features and Performance • • • • • • • Metro MSA Compatible Wide Drive Range (3V to 10V) Single-ended Input / Output Low Power Dissipation (1.2W at Vo = 6V) Very Low Rail Ripple 25ps Edge Rates (20/80) Small Form Factor - 11.4 x 8.9 x 2 mm - 0.450 x 0.350 x 0.080 inches Evaluation Board Available. Description The TriQuint TGA4953-SCC-SL is pa.

  TGA4953-SCC-SL   TGA4953-SCC-SL


Document
Product Datasheet April 11, 2006 9.9-12.5Gb/s Optical Modulator Driver OC-192 Metro and Long Haul Applications Surface Mount Package TGA4953-SCC-SL Key Features and Performance • • • • • • • Metro MSA Compatible Wide Drive Range (3V to 10V) Single-ended Input / Output Low Power Dissipation (1.2W at Vo = 6V) Very Low Rail Ripple 25ps Edge Rates (20/80) Small Form Factor - 11.4 x 8.9 x 2 mm - 0.450 x 0.350 x 0.080 inches Evaluation Board Available. Description The TriQuint TGA4953-SCC-SL is part of a series of surface mount modulator drivers suitable for a variety of driver applications and is compatible with www.DataSheet4U.com Metro MSA standards. The 4953 consists of two high performance wideband amplifiers combined with off chip circuitry assembled in a surface mount package. A single 4953 placed between the MUX and Optical Modulator provides OEMs with a board level modulator driver surface mount solution. The 4953 provides Metro and Long Haul designers with system critical features such as: low power dissipation (1.1W at Vo = 6V), very low rail ripple, high voltage drive capability at 5V bias (6 V amplitude adjustable to 3 V), low output jitter (1ps rms typical), and low input drive sensitivity (250mV at Vo = 6V). The 4953 requires external DC blocks, a low frequency choke, and control circuitry. The TGA4953-SCC-SL is available on an evaluation board. RoHS compliant version available. TriQuint Semiconductor Texas : (972)994-8465 • Primary Applications • • Mach-Zehnder Modulator Driver for Metro and Long Haul IRZ & Duobinary Applications Measured Performance TGA4953 Evaluation Board (Metro MSA Conditions) 10.7 Gb/s, VD = 5 V, ID = 210 mA, (Pdc = 1.1W) VOUT = 6 VPP, CPC = 50%, VIN = 500 mVPP Scale: 2 V/div, 15 ps/div Fax (972)994-8504 Web: www.triquint.com 1 Product Datasheet April 11, 2006 TGA4953-SCC-SL TABLE I MAXIMUM RATINGS Symbol VD1 VD2T Drain Voltage VG1 VG2 VCTRL1 VCTRL2 ID1 ID2T | IG1 | | IG2 | | ICTRL1 | | ICTRL2 | PIN VIN PD TCH TM TSTG 1/ 2/ 3/ 4/ Gate Voltage Range Control Voltage Range Drain Supply Current (Quiescent) Gate Supply Current Control Supply Current Input Continuous Wave Power 12.5Gb/s PRBS Input Voltage Power Dissipation Operating Channel Temperature Mounting Temperature (10 Seconds) Storage Temperature Parameter Value 8V -3V to 0V -3V to VD 200 mA 350 mA 15 mA 15 mA 23 dBm 4 VPP 4W 150 C 230 C -65 to 150 0C 0 0 Notes 1/ 2/ 1/ 1/ 1/ 2/ 1/ 1/ 5/ 1/ 2/ 1/ 2/ 1/ 2/ 3/ 4/ These ratings represent the maximum operable values for this device Combinations of supply voltage, supply current, input power, and output power shall not exceed PD at a package base temperature of 80°C When operated at this bias condition with a baseplate temperature of 80°C, the MTTF is reduced Junction operating temperature will directly affect the device median time to failure (MTTF). For maximum life, it is recommended that junction temperatures be maintained at the lowest possible levels. Assure VCTRL1 never exceeds VD1, and VCTRL2 never exceeds VD2 during bias up and down sequences. 5/ TriQuint Semiconductor Texas : (972)994-8465 Fax (972)994-8504 Web: www.triquint.com 2 Product Datasheet April 11, 2006 TGA4953-SCC-SL TABLE II THERMAL INFORMATION Parameter RΘJC Thermal Resistance (Channel to Backside of Package) Test Conditions VD2T = 4.7V ID2T = 150mA PDISS = 0.71W TBASE = 80°C TCH (°C) 98 RΘJC (°C/W) 26 MTTF (hrs) >1E6 Note: Thermal transfer is conducted through the bottom of the TGA4953-SCC-SL package into the motherboard. The motherboard must be designed to assure adequate thermal transfer to the base plate. TriQuint Semiconductor Texas : (972)994-8465 Fax (972)994-8504 Web: www.triquint.com 3 Product Datasheet April 11, 2006 TGA4953-SCC-SL TABLE III RF CHARACTERIZATION TABLE (TA = 25°C, Nominal) Parameter Small Signal Bandwidth Saturated Power Bandwidth 0.1, 2, 4 GHz 6 GHz 10 GHz 14 GHz 16 GHz 0.1, 2, 4, 6, 10, 14, 16 GHz 0.1, 2, 4, 6, 10, 14, 16 GHz 3 GHz 30 28 26 19 14 10 15 Test Conditions Min Typ Max Units Notes 8 GHz 12 GHz Small Signal Gain dB 1/ 2/ Input Return Loss Output Return Loss Noise Figure Small Signal AGC Range Saturated Output Power dB 1/ 2/ 10 15 dB 1/ 2/ 2.5 dB Midband 30 dB 2, 4, 6, 8 & 10 GHz 25 dBm 6/ 7/ TriQuint Semiconductor Texas : (972)994-8465 Fax (972)994-8504 Web: www.triquint.com 4 Product Datasheet April 11, 2006 TGA4953-SCC-SL TABLE III RF CHARACTERIZATION TABLE (TA = 25°C, Nominal) Parameter Test Conditions VD2T = 8.0V VD2T = 6.5V VD2T = 5.5V VD2T = 4.5V VD2T = 4.0V VIN = 500mVPP VIN = 800mVPP VIN = 250mVPP VIN = 500mVPP VIN = 800mVPP 250mVPP 800mVPP 250mVPP 800mVPP 26.5 28.5 28.5 Min 10 8.0 7.0 6.0 5.5 0.9 1.0 32 35 35 6.0 6.0 0.45 0.10 2.0 2.0 Typ Max Units Notes Eye Amplitude VPP 3/ 4/ Additive Jitter (RMS) Q-Factor Delta Crossing Percentage Delta Eye Amplitude Ps 5/ V/V % VPP Table III Notes: 1/ Verified at package level RF test 2/ Package RF Test Bias: VD = 5V, adjust VG1 to achieve ID = 65mA then adjust.


TGA4805-EPU TGA4953-SCC-SL TGA4954-SL


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)