AM108-G

Silicon Miniature Single-Phase Bridge AM100-G/150-G thru AM1010-G/1510-G Voltage: 50 ~ 1000 Volts Current: 1.0 ~ 1.5 Amp Features: Ratings to 1000V PRV Surge overloadrating - 30/50 amperes peak Ideal for printed circuited board Reliable construction utilizing molded plastic Mounting position: Any .217 (5.5) .197 (5.0) 1.2MIN (30.5) 1.0MIN (25.4) AM .358 (9.1) MAX Mechanical Data: Case: Reliable low cost construction utilizing molded plastic technique results in inexpensive product Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: Polarity symbols marking on body Weight: 0.05 ounce, 1.3 grams Available with 0.50 inch leads (P/N add Suffix “S”) POS. L EAD .200 (5.6) .180 (4.6) .0 3 2 ( 8.1) DIA .0 3 0( 7.6) .200 (5.6) .180 (4.6) Maximum Ratings and Electrical Characteristics Rating at 25ºC ambient temperature unless otherless specified Single phase, half wave, 60Hz, Resistive or inductive load. www.DataSheet4U.com For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge input Voltage Maximum DC Blocking Voltage AM100 Maximum Average Forward Rectified Current at TA=50ºC Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at Rated TA=25ºC DC Blocking Voltage per element TA=100ºC I2t Rating for fusing (t<8.35ms) Typical Junction Capacitance per leg (Note1) CJ Typical Thermal resistance per leg (Note 2) Rθ...