B41889

Aluminum electrolytic capacitors Single-ended capacitors Series/Type: www.DataSheet4U.com B41889 December 2006 Date: © EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors Very low impedance  105 °C B41889 General-purpose grade capacitors Applications For use in output circuits of switch-mode power supplies of compact design For professional industrial electronics, telecommunications and data processing equipment Features Lowest impedance at high frequency Very low equivalent series resistance ESR High ripple current capability Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Delivery mode Terminal configurations and packing: Bulk Taped, Ammo pack Cut Kinked PAPR (protection against polarity reversal): J leads Refer to chapter "Single-ended capacitors  Taping, packing and lead configurations" for further details and ordering example. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 23 B41889 Very low impedance  105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan δ (20 °C, 120 Hz) 6.3 ... 16 V DC 1.15  VR 470 ... 2200 µF ±20%  M For capacitance higher than 1000 µF add 0.02 for e...