DatasheetsPDF.com

HD4.7Mxx Dataheets PDF



Part Number HD4.7Mxx
Manufacturers NTE Electronics
Logo NTE Electronics
Description (HD Series) HIGH-FREQ ALUMINUM ELECTROLYTIC
Datasheet HD4.7Mxx DatasheetHD4.7Mxx Datasheet (PDF)

HIGH–FREQ ALUMINUM ELECTROLYTIC HD SERIES SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non–polarized capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identifica.

  HD4.7Mxx   HD4.7Mxx



Document
HIGH–FREQ ALUMINUM ELECTROLYTIC HD SERIES SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non–polarized capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. RATINGS Capacitance Range: 1.0µf to 10µf Tolerance: ±20% Voltage Range: 25 Volts and 50 Volts PERFORMANCE SPECIFICATIONS Operating Temperature Range: –25°C to +85°C (–13°F to +185°F) Leakage Current: I ≤ 0.2CV (measured after 5 minutes of applied rated voltage) I = Leakage Current (µA) C = Nominal Capacitance (µf) V = Rated Voltage (V) Capacitance Tolerance: ±20% (M) measured at +20°C (+68°F), 1kHZ Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F), at specified ripple current Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within ±15% of initial value Shelf Life: 500 Hrs @ +85°C (+185°F), no voltage applied Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within ±15% of initial value CASE SIZE AND DIMENSIONS: Insulating Sleeve 15.0 Min www.DataSheet4U.com dØ A ±0.5 L’ 5.0 Min D’ Ø HD Series Dimensions: Diameter (D Ø) x Length (L): mm Capacitance (µf) 1.0 2.2 3.3 4.7 5.6 6.8 8.2 25V and 50V 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 16 x 31.5 16 x 35.5 18 x 35.5 18 x 40 Ripple Current* (Ap–p) 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 ORDERING INFORMATION HD Series Capacitance Tolerance Voltage 4.7 M 50 10.0 * Allowable ripple current @ 70°C, 12V DC, and 15.75kHZ HD Mechanical Specs: Dimensions (mm) Outside Diameter (D Ø) Lead Spacing (A) Lead Wire (d Ø) 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com 9 .


HD3.3Mxx HD4.7Mxx HD5.6Mxx


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)