ICs for use with low voltage Crystal Oscillators
XC2165 Series
ICs for use with low voltage Crystal Oscillators
ETR14007_002
■GENERAL DESCRIPTION
The XC2165 series is ...
Description
XC2165 Series
ICs for use with low voltage Crystal Oscillators
ETR14007_002
■GENERAL DESCRIPTION
The XC2165 series is a CMOS IC operates in 1.5V to 3.6V with the built-in circuits for crystal oscillator and divider. Output is selectable from any one of f0, f0/1, f0/2, f0/4 and f0/8. With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only an external crystal. In stand-by mode, oscillation stops completely and output pin Q0 becomes high impedance. The XC2165 series is available in SOT-26 package.
■APPLICATIONS
●Crystal oscillation modules ●Micro computers, DSP clocks ●Communication equipment ●Various system clocks ●Cellular and portable phones
■FEATURES
Oscillation Frequency
: 8MHz~120MHz
Divider Ratio Output Operating Voltage Range Low Current Consumption
(Fundamental) : f0/1, f0/2, f0/4, f0/8
: 3-State : 1.5V ~ 3.6V : Stand-by function included : 30μA (MAX.) when stand-by
Built-in Ca...
Similar Datasheet