LOW VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER
AH291
LOW VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER
Features
• • • • • • • On Chip Hall Sensor Rotor-Locked Shutdo...
Description
AH291
LOW VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER
Features
On Chip Hall Sensor Rotor-Locked Shutdown Automatically Restart Built-in Zener Protection for Output Driver Operating Voltage: 1.8V~5.75 V Output Current: IO( AVE ) = 400 mA Lead Free Packages: SIP-4L and SOT89-5L
General Description
AH291 is a monolithic fan motor controller with Hall sensor’s capability. It contains two complementary open-collector drivers for motor’s coil driving, automatic lock shutdown and restart function relatively. Rotor-lock shutdown detection circuit turns off the output driver when the rotor is blocked to avoid coil overheat. Then, the automatic recovery circuit will restart the motor. These protected actions are repeated and periodic during the blocked period. Until the blocking is removed, the motor recovers and runs normally.
Ordering Information
AH291 - X X X
Package P: SIP-4L Y: SOT89-5L
Lead L : Lead Free
Packing -B : -7/-13 : Bulk Taping
Note:
1.
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
Lead-free
Package Code P Y
Packaging (Note 2) SIP-4L SOT89-5L
Quantity
Lead-free
AH291-P AH291-Y
Tube/Bulk Part Number Suffix 1000 -B NA NA
7” Tape and Reel Part Number Suffix NA NA 2500/Tape & Reel -13 Quantity
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
AH291...
Similar Datasheet