AH286
Hall-Effect Smart Fan Motor Controller Features
- On chip Hall sensor - Rotor-locked shutdown - Automatically re...
AH286
Hall-Effect Smart Fan Motor Controller Features
- On chip Hall sensor - Rotor-locked shutdown - Automatically restart - Rotor-state detection (RD) output - Buil t-in Zener protection for output driver - Operating voltage: 3.8V~20 V - Output current: IO(AVE) = 500mA for SIP-5/SOT89-5 - Output current: IO(AVE) = 400mA for SOT23-5 - Package: SIP-5L, SOT23-5L, SOT89-5L
General Description
AH286 is a monolithic fan motor controller with Hall sensor’s capability. It contains two complementary open-drain
transistors for motor’s coil driving, automatic lock current shutdown, and recovery protections. In addition, rotor-state detection (RD) output is for Rotor-state detection. To avoid coil burning, rotor-lock shutdown detection circuit shut down the output driver if the rotor is blocked and then the automatic recovery circuit will try to restart the motor. This function repeats while the rotor is blocked. Until the blocking is removed, the motor recovers running normally.
Pin Configuration
286 ( Front View )
1 : RD 2 : Vdd 3 : DO 4 : DOB 5 : GND
1 2 3 4 5
Pin Descriptions
Symbol RD Vdd DO DOB GND Description Rotor-state detection Input power Output pin Output pin Ground
SIP-5L
Vdd 5 Vdd 1 GND 2 DO 3 SOT89-5L 286 7 4 DOB 5 RD 286 DOB 4
1
2
3
RD GND DO SOT23-5
Ordering Information
AH286 X - X X X
Wafer Body Blank or A~Z : if necessary to specify
Package P: SIP-5L W: SOT23-5L Y: SOT89-5L
Lead L : Lead Free
Packing Blank : Bulk A : Tape & Reel (for SOT Packag...