OCXO Sine Output
OCXO Sine Output
Specifications
HCD220
Parameters
Frequency range: 5.0 ~ 16.0MHz Ageing per day (at despatch): < ±1x10-...
Description
OCXO Sine Output
Specifications
HCD220
Parameters
Frequency range: 5.0 ~ 16.0MHz Ageing per day (at despatch): < ±1x10-9 < ±2x10-10 < ±1x10-10 (<10MHz only) Frequency stability: < ±2x10-8 per year -9 < ±1x10 per 10% change in VDD < ±5x10-10 per 10% change in load Short term stability: < ±5x10-12 over 1 sec (5.0MHz) < ±1x10-11 over 1 sec (10.0MHz) Product
HCD220
Option Codes
˿ ˿ ˿ ˿ ˿ ˿ ˿ ˿ ˿ ˿ ˿ D A G specify N T specify R S T V A C F G D F G
Optional SMA/B/C/BNC/MCX RF connector(s) 10.00 40.00
9
1
Temperature stability:
PIN CONNECTION Freq adjust (+ve) Fine adjust Freq adjust (-ve) Isolated RF output Isolated RF output + Supply DO NOT USE - Supply Case
15.00
50.00 17.00
1 2 3 4 5 6 15.90 7 8 9
< ±1x10-8 < ±5x10-9 < ±3x10-9 < ±1x10-9
Operating temperature range: 0 to +50°C -10 to +60°C -20 to +70°C -40 to +70°C Storage temperature range: -40 to +90°C Output waveform: Sine wave, 7dBm (±1dBm) into 50⏲ Other options from 3 to +13dBm Frequency adjustment: ±5x10-7 (typ) over +0.5 to +8V (sufficient for 10 years ageing min) Stabilised +8V supply provided Mechanical ±5x10-7
A
A
70.00
Fixing holes M3 tapped. Penetration 5mm max.
specify
A
A 15.90
5.90
5.90
Mechanical frequency adjustment on this face
Scale 1:2
Features
Supply voltage (VDD): +12V (±0.5V) +24V (±0.5V) Other options from 12~30V Power consumption: 5.0W max at switch on 2.0W typ when stabilised at 25°C Warm up: < ±1x10-8 after 12mins at +25°...
Similar Datasheet