Low Power Laser Driver
SY88982L
3.3V, 2.7Gbps High Current, Low Power Laser Driver for FP/DFB Lasers
General Description
The SY88982L is a sin...
Description
SY88982L
3.3V, 2.7Gbps High Current, Low Power Laser Driver for FP/DFB Lasers
General Description
The SY88982L is a single 3.3V supply, low power consumption, small form factor driver for telecom/datacom applications using FP/DFB lasers at data rates up to 2.7Gbps. The driver can deliver modulation current up to 90mA, and the high compliance voltage it offers, makes the part suitable for high-current operation (with the laser AC- or DCcoupled to it). This device is intended to be used with Micrel’s MIC3000/1 Optical Transceiver Management IC, which allows for both modulation and bias current control and monitoring, automatic power control, and temperature compensation. All support documentation can be found on Micrel’s web site at: www.micrel.com.
Features
2.4V minimum laser compliance voltage for highcurrent DC-coupled applications 48mA power supply current typical Operation up to 2.7Gbps Modulation current up to 90mA Designed for use with the MIC3000/1 Small form factor 16-Pin (3mm x 3mm) MLF™ package Laser may be DC- or AC-coupled
Applications
Multi-rate LAN, MAN applications up to 2.7Gbps: FC, GbE, SONET OC3/12/24/48 and SDH STM1/4/8/16 SFF, SFP modules
Markets
www.DataSheet4U.com
Telecom, Datacom
________________________________________________________________ Typical Application
Laser AC-Coupled to the Driver
Laser DC-Coupled to the Driver
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
April 2005
M9999-041505 hbwhelp@micrel...
Similar Datasheet