SY69753AL

SY69753AL 3.3V, 125Mbps, 155Mbps Clock and Data Recovery General Description The SY69753AL is a complete Clock Recovery and Data Retiming integrated circuit for OC-3/STS-3 applications at 155Mbps NRZ. The device is ideally suited for SONET/SDH/ATM applications and other high-speed data transmission systems. Clock recovery and data retiming is performed by synchronizing the on-chip VCO directly to the incoming data stream. The VCO center frequency is controlled by the reference clock frequency and the selected divide ratio. On-chip clock generation is performed through the use of a frequency multiplier PLL with a byte rate source as reference. The SY69753AL also includes a link fault detection circuit. Datasheets and support documentation can be found on Micrel’s web site at: www.micrel.com. Features 3.3V power supply SONET/SDH/ATM compatible Clock and data recovery for 125Mbps/155Mbps NRZ data stream Two on-chip PLLs: one for clock generation and another for clock recovery Selectable reference frequencies Differential PECL high-speed serial I/O Line receiver input: no external buffering needed Link fault indication 100k ECL compatible I/O Industrial temperature range (–40°C to +85°C) Lower power: fully compatible with Micrel’s SY87701V, but with 30% less power Available in 32-pin EPAD-TQFP Applications Ethernet media converter(m) SONET/SDH/ATM OC-3 Proprietary architecture at 120Mbps to 180Mbps Micrel Inc. 2180 Fortune Drive San Jose, CA 9...