Features
• • • • • • • • •
Supply Voltage Range 3V to 4.6V (Unregulated) Auxiliary Voltage Regulator On-chip Low Current...
Features
Supply Voltage Range 3V to 4.6V (Unregulated) Auxiliary Voltage
Regulator On-chip Low Current Consumption Few Low Cost External Components No Mechanical Tuning Required Non-blindslot and Blindslot Operation Unlimited Multislot Operation with Advanced Closed-loop Modulation Supports Multiple Reference Clocks (10.368 MHz/13.824 MHz/20.736 MHz) TX Preamplifier with 0 dBm Output Power at 1.9 GHz and Ramp-signal Generator for SiGe Power Amplifier
DECT Single-chip Transceiver T2801
1. Description
The T2801 is an RF IC for low-power DECT applications. The QFN48 packaged IC is a complete transceiver including image rejection mixer, IF amplifier, FM demodulator, baseband filter, RSSI, TX preamplifier, power-ramping generator for power amplifiers, integrated synthesizer, fully integrated VCO, TX filter and modulation compensation circuit for advanced closed-loop modulation concept. No mechanical tuning is necessary in production. Figure 1-1. Block Diagram
www.DataSheet4U.com
MIXER IF_IN OUT IR MIXER RF_IN
DEMOD TANK
IF_TANK IF AMP 1 IF AMP 2
CF
BB_OUT DEMOD BB FILTER
RAMP_OUT RAMP_SET
RAMP GEN
D/A RSSI
DEMOD DAC RSSI
VCO TX / RX SWITCH
GF TX_DATA
PC TX_OUT f :n TX DRIVER
PD
MCC
3-WIRE BUS
CLOCK DATA ENABLE
PU_VCO
VCO REG
AUX REG
CP
RC f :n
CTRL LOGIC
RX_ON TX_ON PU_RX/TX PU_PLL
VREG_VCO VS_VCO VREG VS_REG VTUNE GND_VCO PU_REG REG_CTRL
CP I_CPSW
LD
REF_CLK
Rev. 4567B–DECT–03/06
Table 1-1.
Name AUX REG BBF CP DAC DEMOD GF IF AMP1 ...