LOW-POWER HEX ECL-to-TTL TRANSLATOR
Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
LOW-POWER HEX ECL-to-TTL TRANSLATOR
SY100S325
SY100S325
FEATURES
DESCRI...
Description
Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
LOW-POWER HEX ECL-to-TTL TRANSLATOR
SY100S325
SY100S325
FEATURES
DESCRIPTION
s Max. propagation delay of 3.7ns s IEE min. of –37mA s TTL outputs s Extended supply voltage option:
VEE = –4.2V to –5.5V s 25% faster than National's 325 s Differential inputs with built-in offset s Voltage and temperature compensation for improved
noise immunity s VBB output for single-ended use s Internal 75KΩ input pull-down resistors s Function and pinout compatible with Fairchild F100K s Available in 28-pin PLCC package
The SY100S325 are hex translators for converting 100K ECL logic levels to TTL logic levels. Inputs can be used as inverting, non-inverting or differential receivers. An internal reference voltage generator provides VBB for single-ended operation or for use in Schmitt trigger applications. All inputs have 75KΩ pull-down resistors. The outputs will go LOW when the inputs are either open or have the same potential.
When used in single-ended operation, the apparent input threshold of the true inputs is 20mV to 40mV higher (positive) than the threshold of the complementary inputs. The VTTL and VEE power may be applied in either order.
BLOCK DIAGRAM
D0 D0 D1 D1 D2 D2 D3 D3 D4 D4 D5 D5
VBB Q0 Q1 Q2 Q3 Q4 Q5
PIN NAMES
Pin D0–D5 D0–D5 Q0–Q5 VEES VTTL VCCA
Function Data Inputs Inverting Data Inputs Data Outputs VEE Substrate TTL VCC Power Supply VCCO for ECL Outputs
M9999-051607 hbwhelp@micrel.com or (408) 955-1690
1
Rev.: I
Amen...
Similar Datasheet