AAT2820

Triple-Output Charge Pump Regulator General Description The AAT2820 is a member of AnalogicTech's Total Power Management IC™ (TPMIC™) product family. It is a triple output charge pump targeted for active matrix thin-film transistor (TFT), liquid crystal displays (LCDs), and CCD camera bias for systems operating with lithium-ion/polymer batteries. The device generates three regulated output voltages for turn-on gate drive bias (VPOS), turn-off gate voltage bias (VNEG), and logic voltage. The VPOS and VNEG output voltages are independently regulated. Both outputs use external diode and capacitor multiplier stages (as many stages as required) to regulate output voltages up to +25V and -25V. An additional regulated output voltage is provided for biasing the display module. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high switching frequency enables the use of very small external capacitors. A low shutdown feature disconnects the load from VIN and reduces quiescent current to less than 0.1µA. AAT2820 Features ChargePump™ VIN Range: 2.7V to 5.5V 5V Regulated Output Voltage Two Adjustable Regulated Output Voltages: VPOS and VNEG — Positive Charge Pump Up to +25V — Negative Charge Pump Down to -25V — Optional Power-Up Sequence with AAT2820-1 Internal Power MOSFETs <1µA of Shutdown Current Internally Controlled Soft Start Fast Transient Response Ultra-Thin Solution (No Inductors) 16-Pin TDFN44 Package Temperature Range: -...