DatasheetsPDF.com

E24SR06508 Dataheets PDF



Part Number E24SR06508
Manufacturers Delta Electronics
Logo Delta Electronics
Description 66W Eighth Brick Family DC/DC Power Modules
Datasheet E24SR06508 DatasheetE24SR06508 Datasheet (PDF)

FEATURES High efficiency: Size: 90.5% @ 6.5V/ 8A 58.4mmx22.8mmx10.0mm (2.30”x0.90”x0.39”) SMD and Through-hole versions Industry standard pin out 2:1 input range Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Basic insulation 2250V isolation Monotonic startup into normal and pre-biased loads Output voltage trim down to -23% No minimum load required ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) recognized, and TUV (EN609.

  E24SR06508   E24SR06508



Document
FEATURES High efficiency: Size: 90.5% @ 6.5V/ 8A 58.4mmx22.8mmx10.0mm (2.30”x0.90”x0.39”) SMD and Through-hole versions Industry standard pin out 2:1 input range Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Basic insulation 2250V isolation Monotonic startup into normal and pre-biased loads Output voltage trim down to -23% No minimum load required ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) recognized, and TUV (EN60950) certified CE mark meets 73/23/EEC and 93/68/EEC directive Delphi Series E24SR, 66W Eighth Brick Family DC/DC Power Modules: 24V in, 6.5V/8A out www.DataSheet4U.com The Delphi Series E24SR Eighth Brick, 24V input, single output, isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. This product family is available in either a through-hole or surface-mounted package and provides up to 66 watts of power or 20A of output current (3.3V and below) in an industry standard footprint and pinout. The E24SR converter operates from an input voltage of 18V to 36V and is available in output voltages from 3.3V to 12V. Efficiency for the 6.5V output is 90.5% at 8A full load. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. All models are fully protected from abnormal input/output voltage, current, and temperature conditions. The Delphi Series converters meet all safety requirements with basic insulation. OPTIONS Positive On/Off logic SMD pin Short pin lengths available APPLICATIONS Telecom/DataCom Wireless Networks Optical Network Equipment Server and Data Storage Industrial/Test Equipment DATASHEET DS_E24SR06508_02092007 TECHNICAL SPECIFICATIONS (TA=25°C, airflow rate=300 LFM, Vin=27Vdc, nominal Vout unless otherwise noted.) PARAMETER ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Transient (100ms) Operating Temperature Storage Temperature Input/Output Isolation Voltage INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Lockout Hysteresis Voltage Maximum Input Current No-Load Input Current Off Converter Input Current Inrush Current (I2t) Input Reflected-Ripple Current Input Voltage Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Set Point Output Voltage Regulation Over Load Over Line Over Temperature Total Output Voltage Range Output Voltage Ripple and Noise Peak-to-Peak RMS Operating Output Current Range Output Over Current Protection DYNAMIC CHARACTERISTICS Output Voltage Current Transient Positive Step Change in Output Current Negative Step Change in Output Current Settling Time (within 1% Vout nominal) Turn-On Transient Start-Up Time, From On/Off Control Start-Up Time, From Input Back bias start-up Back drive current limit while pin on-off is enabled Back drive current limit while pin on-off is disabled Maximum Output Capacitance EFFICIENCY 100% Load 60% Load ISOLATION CHARACTERISTICS Input to Output Isolation Resistance Isolation Capacitance FEATURE CHARACTERISTICS Switching Frequency ON/OFF Control, Negative Remote On/Off logic Logic Low (Module On) Logic High (Module Off) ON/OFF Control, Positive Remote On/Off logic Logic Low (Module Off) Logic High (Module On) On/off pin open circuit voltage On/off pin pull down resistance Output Voltage Trim Range Output Voltage Remote Sense Range Output Over-Voltage Protection GENERAL SPECIFICATIONS MTBF Weight Over-Temperature Shutdown NOTES and CONDITIONS E24SR06508 (Standard) Min. Typ. Max. 36 50 113 125 2250 36 17 16 1 100 3 17.8 17 1.5 3.4 150 10 0.1 Units Vdc Vdc °C °C Vdc Vdc Vdc Vdc Vdc A mA mA A2s mA dB Vdc mV mV mV V mV mV A % mV mV us ms ms 0.1 50 5000 90.5 90 2250 10 1500 350 -0.7 3 -0.7 3 0.5 18 0.5 18 9.6 +1.5 +1.5 8.4 TBD 22.0 123 A mA µF % % Vdc MΩ pF kHz V V V V V Kohm % % V M hours grams °C 100ms Refer to figure 21 for measuring point -40 -55 18 16 15 0.7 100% Load, 18Vin P-P thru 12µH inductor, 5Hz to 20MHz 120 Hz Vin=27V, Io=Io.max, Tc=25°C Io=Io, min to Io, max Vin=19V to36V Tc=-40°C to100°C Over sample load, line and temperature 5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 10µF tantalum Full Load, 1µF ceramic, 10µF tantalum Output Voltage 10% Low 10µF Tan & 1µF Ceramic load cap, 0.1A/µs 50% Io.max to 75% Io.max 75% Io.max to 50% Io.max 6.4 15 55 6.5 ±3 ±3 ±65 6.30 50 15 0 110 150 150 150 5 5 6.6 ±10 ±10 6.7 100 30 8 140 250 250 ≤ 90% of nominal output voltage Io=0A Io=0A Full load; 5% overshoot of Vout at startup Pout ≦ max rated power Pout ≦ max rated power Over full temp range; Io=80% of Io, max; Ta=25°C, 300LFM airflow Refer to figure 21 for measuring point 12 -23 6.9 DS_E24SR06508_02092007 2 ELECTRICAL CHARACTERISTICS CURVES 94 91 88 Efficiency (%) 8.0 7.0 6.0 Loss (W) 36Vi 5.0 4.0 3.0 2.0.


E24SR05012 E24SR06508 E24SR12005


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)