M1S18TAJ

M1S Series 5.0 Volt HCMOS/TTL CompatibleOscillators M1S Series 5.0 Volt HCMOS/TTL Compatible Ceramic Package Surface Mount Oscillators Features grounded lid for reduced EMI. This product is available in both 5.0 V (M1S) and 3.3 V (M2S). RECOMMENDATION: Unless board height (.185 vs. .140) is a concern, M-tron recommends the M7S series. See page 79. Available Stabilities vs. Temperature www.DataSheet4U.com A = Available N = Not Available S = Standard C = Consult Factory Electrical Specifications Pin Connections Tri-state Control Logic Pin 1 high or floating: clock signal output. Pin 1 low: output disabled to high impedance. 1 2 3 TTL load - See load circuit diagram #1 on page 137. HCMOS load - See load circuit diagram #2 on page 137. Symmetry is measured at 1.4 V with TTL load and at 50% Vdd with HCMOS load. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load. See page 136, Figure “2” for suggested solder profile. 64 ...