NBSG86A

NBSG86A 2.5V/3.3V SiGe Differential Smart Gate with Output Level Select The NBSG86A is a multi−function differential Logic Gate which can be configured as an AND/NAND, OR/NOR, XOR/XNOR, or 2:1 MUX. This device is part of the GigaComm™ family of high performance Silicon Germanium products. The device is housed in a low profile 4x4 mm, 16−pin, flip−chip BGA or a 3x3 mm 16 pin QFN package. Differential inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), LVCMOS/LVTTL, CML, or LVDS. The OLS* input is used to program the peak−to−peak output amplitude between 0 and 800 mV in five discrete steps. The NBSG86A employs input default circuitry so that under open input conditions (Dx, Dx, VTDx, VTDx, VTSEL) the outputs of the device will remain stable. Features http://onsemi.com MARKING DIAGRAM* FCBGA−16 BA SUFFIX CASE 489 16 SG 86A LYW 1 1 QFN−16 MN SUFFIX CASE 485G ÇÇ ÇÇ Maximum Input Clock Frequency > 8 GHz Typical Maximum Input Data Rate > 8 Gb/s Typical 165 ps Typical Propagation Delay 40 ps Typical Rise and Fall Times Selectable Swing PECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V Selectable Swing NECL Output with NECL Inputs with Operating Range: VCC = 0 V with VEE = −2.375 V to −3.465 V Selectable Output Level (0 V, 200 mV, 400 mV, 600 mV, or 800 mV Peak−to−Peak Output) 50 W Internal Input Termination Resistors www.DataSheet4U.com SG 86A ALYWG G A = Assembly Location L = Wafer ...