NB100LVEP221

NB100LVEP221 2.5V/3.3V 2:1:20 Differential HSTL/ECL/PECL Clock Driver Description The NB100LVEP221 is a low skew 2:1:20 differential clock driver, designed with clock distribution in mind, accepting two clock sources into an input multiplexer. The two clock inputs are differential ECL/PECL; CLK1/CLK1 can also receive HSTL signal levels. The LVPECL input signals can be either differential configuration or single−ended (if the VBB output is used). The LVEP221 specifically guarantees low output−to−output skew. Optimal design, layout, and processing minimize skew within a device and from device to device. To ensure tightest skew, both sides of differential outputs should be terminated identically into 50 W even if only one output is being used. If an output pair is unused, both outputs may be left open (unterminated) without affecting skew. The NB100LVEP221, as with most other ECL devices, can be operated from a positive VCC supply in LVPECL mode. This allows the LVEP221 to be used for high performance clock distribution in +3.3 V or +2.5 V systems. In a PECL environment, series or Thevenin line terminations are typically used as they require no additional power supplies. For more information on PECL terminations, designers should refer to Application Note AND8020/D. The VBB pin, an internally generated voltage supply, is available to this device only. For single−ended LVPECL input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB...