Document
Switch-mode Power Rectifier
D2PAK Power Surface Mount Package
MURB1660CT, NRVUB1660CTT4G
These state−of−the−art devices are designed for use in switching power supplies, inverters, and as free wheeling diodes.
Features
• Package Designed for Power Surface Mount Applications • Ultrafast 60 Nanosecond Recovery Times • 175°C Operating Junction Temperature • Epoxy Meets UL 94 V−0 @ 0.125 in • High Temperature Glass Passivated Junction • High Voltage Capability to 600 V • Low Leakage Specified @ 150°C Case Temperature • Short Heat Sink Tab Manufactured − Not Sheared! • Similar in Size to Industrial Standard TO−220 Package • NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Mechanical Characteristics:
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0 • Weight: 1.7 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Device Meets MSL1 Requirements • ESD Ratings:
♦ Machine Model, C > 400 V ♦ Human Body Model, 3B > 8000 V
DATA SHEET www.onsemi.com
ULTRAFAST RECTIFIER 16 AMPERES, 600 VOLTS
D2PAK CASE 418B
STYLE 3
1 4
3
MARKING DIAGRAM
AY WW U1660G
AKA
A Y WW U1660 G AKA
= Assembly Location = Year = Work Week = Specific Device Code = Pb−Free Package = Diode Polarity
ORDERING INFORMATION
Device
Package Shipping†
MURB1660CTG
D2PAK 50 Units/Rail (Pb−Free)
MURB1660CTT4G
D2PAK
800 /
(Pb−Free) Tape & Reel
NRVUB1660CTT4G D2PAK
800 /
(Pb−Free) Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
*For additional information on our Pb−Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2014
1
September, 2022 − Rev. 10
Publication Order Number: MURB1660CT/D
MURB1660CT, NRVUB1660CTT4G
MAXIMUM RATINGS (Per Leg)
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
Average Rectified Forward Current (Rated VR, TC = 150°C) Total Device
Rating
Symbol VRRM VRWM VR IF(AV)
Value 600
8.0 16
Unit V
A
Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 150°C)
IFM
A
16
Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IFSM
A
100
Operating Junction and Storage Temperature Range
TJ, Tstg
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg) Rating
Maximum Thermal Resistance, Junction−to−Case Maximum Thermal Resistance, Junction−to−Ambient (Note 1) Temperature for Soldering Purposes: 1/8″ from Case for 5 Seconds 1. See Chapter 7 for mounting conditions.
Symbol RqJC RqJA TL
Value 2.0 50 260
Unit °C/W °C/W
°C
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Symbol
Max
Unit
Maximum Instantaneous Forward Voltage (Note 2) (iF = 8.0 Amp, TC = 150°C) (iF = 8.0 Amp, TC = 25°C)
vF
V
1.20
1.50
Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = 150°C) (Rated dc Voltage, TC = 25°C)
iR
mA
500
10
Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp)
trr
ns
60
50
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
iF, INSTANTANEOUS FORWARD CURRENT (AMPS) I R, REVERSE CURRENT ( μ A)
100 50 20 10 5.0 2.0 1.0
0.3
0.1 0.4
10 K
TJ = 150°C 25°C
100°C
1.0 K 400 100 40
10
2.0 1.0 0.4
0.1 0.04
TJ = 150°C 100°C
25°C
0.01
0.6
0.8
1
1.2
1.4
1.6
1.8
100
200
300
400
500
600
vF, INSTANTANEOUS VOLTAGE (V)
VR, REVERSE VOLTAGE (V)
Figure 1. Typical Forward Voltage, Per Leg
Figure 2. Typical Reverse Current, Per Leg
www.onsemi.com 2
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
I F(AV), AVERAGE FORWARD CURRENT (AMPS)
MURB1660CT, NRVUB1660CTT4G
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0
0 140
14
RATED VR APPLIED RqJC = 2°C/W
13 12
DC
11
10
9.0
8.0
7.0
6.0
SQUARE WAVE
5.0
4.0
3.0
2.0
1.0
150
160
170
180
00
TC, CASE TEMPERATURE (°C)
Figure 3. Current Derating, Case, Per Leg
SQUARE WAVE DC
TJ = 175°C 1 2 3 4 5 6 7 8 9 10
IF(AV), AVERAGE FORWARD CURRE.