DatasheetsPDF.com

MURB1620CTR Dataheets PDF



Part Number MURB1620CTR
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description ULTRAFAST RECTIFIER
Datasheet MURB1620CTR DatasheetMURB1620CTR Datasheet (PDF)

MUR1620CTR, MURB1620CTR Preferred Device SWITCHMODE] Power Rectifier These state−of−the−art devices are designed for use in negative switching power supplies, inverters and as free wheeling diodes. Also, used in conjunction with common cathode dual Ultrafast Rectifiers, makes a single phase full−wave bridge. Features http://onsemi.com • • • • • • • • • Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package) Ultrafast 35 Nanosecond Reverse Recovery Times Exhibits Soft Recovery Characte.

  MURB1620CTR   MURB1620CTR



Document
MUR1620CTR, MURB1620CTR Preferred Device SWITCHMODE] Power Rectifier These state−of−the−art devices are designed for use in negative switching power supplies, inverters and as free wheeling diodes. Also, used in conjunction with common cathode dual Ultrafast Rectifiers, makes a single phase full−wave bridge. Features http://onsemi.com • • • • • • • • • Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package) Ultrafast 35 Nanosecond Reverse Recovery Times Exhibits Soft Recovery Characteristics High Temperature Glass Passivated Junction Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures Epoxy Meets UL 94 V−0 @ 0.125 in Complement to MUR1620CT and MURB1620CT Common Cathode Device Pb−Free Packages are Available ULTRAFAST RECTIFIER 16 AMPERES, 200 VOLTS 1 2, 4 3 MARKING DIAGRAMS Mechanical Characteristics: • Case: Epoxy, Molded • Weight: MUR1620CTR: 1.9 Grams (Approximately) www.DataSheet4U.com • • MURB1620CTR: 1.7 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AB CASE 221A STYLE 7 AYWW U1620RG KAK MAXIMUM RATINGS (Per Leg) Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Voltage Per Leg (Rated VR, TC = 160°C) Per Total Device Peak Repetitive Surge Current (Rated VR, Square Wave, 20 kHz, TC = 140°C) Per Diode Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) 8.0 16 IFM 16 A U1620R = Device Code KAK = Diode Polarity A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package Value 200 Unit V 1 A 3 4 D2PAK CASE 418B STYLE 5 AYWW U1620RG KAK IFSM 100 A TJ, Tstg −65 to +175 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2005 1 September, 2005 − Rev. 3 Publication Order Number: MUR1620CTR/D MUR1620CTR, MURB1620CTR THERMAL CHARACTERISTICS (Per Leg) Rating Thermal Resistance, Junction−to−Case Symbol RqJC Value 2.0 Unit °C/W ELECTRICAL CHARACTERISTICS (Per Leg) Rating Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 Amps, TC = 25°C) (iF = 8.0 Amps, TC = 150°C) Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TC = 25°C) (Rated dc Voltage, TC = 150°C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/ms) (IF = 0.5 Amp, di/dt = 100 Amps/ms) 1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%. 100 70 50 1000 500 200 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 Symbol vF 1.2 1.1 iR 5.0 500 trr 85 35 ns mA Value Unit V IR, REVERSE CURRENT (mA) TJ = 175°C 150°C 100°C * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 25°C 0 20 40 60 80 100 120 140 160 180 200 30 iF, INSTANTANEOUS FORWARD CURRENT (AMPS) 20 10 7.0 5.0 150°C 3.0 2.0 25°C 1.0 0.7 0.5 100°C TJ = 175°C VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current* (Per Leg) IF(AV), AVERAGE FORWARD CURRENT (AMPS) 16 14 12 10 8.0 6.0 4.0 2.0 0 140 150 160 170 180 SQUARE WAVE dc RATED VR APPLIED RqJC = 2°C/W 0.3 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg) http://onsemi.com 2 MUR1620CTR, MURB1620CTR PF(AV), AVERAGE POWER DISSIPATION (WATTS) 16 14 12 10 8.0 6.0 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 IF(AV), AVERAGE FORWARD CURRENT (AMPS) SQUARE WAVE dc TJ = 175°C Figure 4. Power Dissipation (Per Leg) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 D = 0.5 0.5 0.1 0.05 0.01 0.05 SINGLE PULSE 0.02 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 t, TIME (ms) 5.0 10 20 50 100 200 500 1000 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 ZqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZqJC(t) 0.2 0.1 Figure 5. Thermal Response 1000 900 800 C, CAPACITANCE (pF) 700 600 500 400 300 200 100 0 0.1 0.2 0.3 0.5 0.7 1.0 0.2 0.3 0.5 0.7 10 VR, REVERSE VOLTAGE (VOLTS) 20 30 50 70 100 Figure 6. Typical Capacitance (Per Leg) http://onsemi.com 3 MUR1620CTR, MURB1620CTR ORDERING INFORMATION Device MUR1620CTR MUR1620CTRG MURB1620CTR MURB1620.


MURB1620CT MURB1620CTR MUR1620CTR


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)