MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MUN2111T1/D
Bias Resistor Transistor
PNP Silicon Surface...
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MUN2111T1/D
Bias Resistor
Transistor
PNP Silicon Surface Mount
Transistor with Monolithic Bias Resistor Network
This new series of digital
transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor
Transistor) contains a single
transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC–59 package which is designed for low power surface mount applications. Simplifies Circuit Design Reduces Board Space Reduces Component Count The SC–59 package can be soldered using wave or reflow. The modified gull–winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. Available in 8 mm embossed tape and reel Use the Device Number to order the 7 inch/3000 unit reel.
R1 PIN2 R2 BASE (INPUT) PIN1 EMITTER (GROUND) PIN3 COLLECTOR (OUTPUT)
MUN2111T1 SERIES
Motorola Preferred Devices
PNP SILICON BIAS RESISTOR
TRANSISTOR
3 2 1
CASE 318D–03, STYLE 1 (SC–59)
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating Collector–Base Voltage Collector–Emitter Voltage Collector Current Total Power Dissipation @ TA = 25°C(1) Derate above 25°C
www.DataSheet4U.com
Symbol VCBO VCEO IC PD
Val...