Document
MPSA62, MPSA63, MPSA64
MPSA64 is a Preferred Device
Darlington Transistors
PNP Silicon
Features
• Pb−Free Packages are Available*
http://onsemi.com
COLLECTOR 3
MAXIMUM RATINGS
Rating Collector −Emitter Voltage MPSA62 MPSA63/64 Collector −Base Voltage MPSA62 MPSA63/64 Emitter −Base Voltage Collector Current − Continuous Total Device Dissipation @ TA = 25°C Derate above 25°C Total Device Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range VEBO IC PD 625 5.0 PD 1.5 12 TJ, Tstg −55 to +150 W mW/°C °C mW mW/°C 1 2 3 VCBO −20 −30 −10 −500 Vdc mAdc Symbol VCES −20 −30 Vdc Value Unit Vdc
BASE 2
EMITTER 1
MARKING DIAGRAM
www.DataSheet4U.com
TO−92 (TO−226AA) CASE 29−11 STYLE 1
MPS A6x AYWWG G
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction−to−Ambient Thermal Resistance, Junction−to−Case Symbol RqJA RqJC Max 200 83.3 Unit °C/W °C/W
x = 2, 3, or 4 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
1
June, 2005 − Rev. 2
Publication Order Number: MPSA62/D
MPSA62, MPSA63, MPSA64
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = −100 mAdc, VBE = 0) Collector Cutoff Current (VCB= −15 Vdc, IE = 0) (VCB = −30 Vdc, IE = 0) Emitter Cutoff Current (VEB = −10 Vdc, IC = 0) ON CHARACTERISTICS (Note 1) DC Current Gain (IC = −10 mAdc, VCE = −5.0 Vdc) hFE MPSA63 MPSA64 MPSA62 MPSA63 MPSA64 VCE(sat) MPSA62 MPSA63, MPSA64 VBE(on) MPSA62 MPSA63, MPSA64 fT MPSA63, MPSA64 − − 125 −1.4 −2.0 − MHz − − −1.0 −1.5 Vdc 5,000 10,000 20,000 10,000 20,000 − − − − − Vdc − V(BR)CES MPSA62 MPSA63, MPSA64 ICBO MPSA62 MPSA63, MPSA64 IEBO − − − −100 −100 −100 nAdc −20 −30 − − nAdc Vdc Symbol Min Max Unit
(IC = −100 mAdc, VCE = −5.0 Vdc) Collector −Emitter Saturation Voltage (IC = −10 mAdc, IB = −0.01 mAdc) (IC = −100 mAdc, IB = −0.1 mAdc) Base −Emitter On Voltage (IC = −10 mAdc, VCE = −5.0 Vdc) (IC = −100 mAdc, VCE = −5.0 Vdc) SMALL− SIGNAL CHARACTERISTICS Current −Gain — Bandwidth Product (Note 2) (IC = −100 mAdc, VCE = −5.0 Vdc, f = 100 MHz) 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2.0%. 2. fT = |hfe| S ftest.
ORDERING INFORMATION
Device MPSA62 MPSA63 MPSA63G MPSA63RLRA MPSA63RLRAG MPSA63RLRM MPSA63RLRMG MPSA63RLRP MPSA63RLRPG MPSA63ZL1 MPSA63ZL1G MPSA64 MPSA64G MPSA64RLRA MPSA64RLRAG MPSA64RLRM MPSA64RLRMG Package TO−92 TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) Shipping † 5000 Units / Bulk 5000 Units / Bulk 5000 Units / Bulk 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Ammo Pack 5000 Units / Bulk 5000 Units / Bulk 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
2
MPSA62, MPSA63, MPSA64
200 hFE , DC CURRENT GAIN (X1.0 K) 100 70 50 30 20 10 7.0 5.0 3.0 2.0 −0.3 25°C VCE = −2.0 V −5.0 V TA = 125°C
−10 V
−55°C
−0.5
−0.7
−1.0
−2.0
−3.0
−5.0
−7.0
−10
−20
−30
−50
−70
−100
−200
−300
IC, COLLECTOR CURRENT (mA)
Figure 1. DC Current Gain
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS
−2.0 TA = 25°C −1.6 V, VOLTAGE (VOLTS) −1.2 VBE(on) @ VCE = −5.0 V −0.8 −0.4 0 −0.3 −0.5 VCE(sat) @ IC/IB = 1000 IC/IB = 100 VBE(sat) @ IC/IB = 100
−2.0 −1.8 −1.6 −1.4 −1.2 −1.0 −0.8 IC = −10 mA −50 mA −100 mA −175 mA
TA = 25°C
−300 mA
−1.0
−2 −3 −5 −10 −20 −30 −50 IC, COLLECTOR CURRENT (mA)
−100 −200 −300
−0.6 −0.1−0.2 −0.5 −1 −2 −5 −10 −20 −50 −100−200−500 −1K−2K −5K−10K IB, BASE CURRENT (mA)
Figure 2. “On” Voltage
Figure 3. Collector Saturation Region
|h FE |, HIGH FREQUENCY CURRENT GAIN
10 4.0 3.0 2.0 1.0 0.4 0.2 0.1 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) −500 −1K VCE = −5.0 V f = 100 MHz TA = 25°C
−1000 IC, COLLECTOR CURRENT (mA) 1.0 ms TA = 25°C TC = 25°C CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT .