Encoder
UNISONIC TECHNOLOGIES CO., LTD RCT2E
ENCODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS
DESCRIPTION
The UTC RCT2E can...
Description
UNISONIC TECHNOLOGIES CO., LTD RCT2E
ENCODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS
DESCRIPTION
The UTC RCT2E can be used with the decoder UTC RCR2C to provide a complete control functions to the remote-controlled toy. The UTC RCT2E is the transmitter. It is provide five function keys to control forward, Backward, Rightward, Leftward and Turbo motions. Beside, a combination of these five motions can be played.
UTC RCT2E is built with auto Power-OFF function. When input key is pulled low, UTC RCT2E will wake up, SC and SO will continuously send out code in RF format (Non-Carrier) and IR format (Carrier). However, when a complete code is sent out and the key is released, UTC RCT2E will automatically go into powered-off mode.
FEATURES
* Wide and Low operating voltage range: 1.8V ~ 5.0V * 5-function remote controller controlling forward/ backward/ turbo/
right/ left. * Provide two transmissive interface (RF and IR) for different
application. * Auto Power-OFF function * Few external components needed and Oscillator with an external
resistor. * Low Standby current and low operating current. * Long distance Remote Control to 100M in UTC RCT2E and UTC
RCR2C pairing. * Typical oscillator frequency:
RF: 116 ~ 140KHz. IR: 114KHz (Carrier Frequency: 57KHz). IR: 76KHz (Carrier Frequency: 38KHz).
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
RCT2EL-D14-T
RCT2EG-D14-T
- RCT2EG-S08-R
Package
DIP-14 SOP-8
CMOS IC
SOP-8 DIP-14
Packing Tube
Tape Reel
RCT2EL-...
Similar Datasheet