MBR350

www.DataSheet4U.com MBR350, MBR360 MBR360 is a Preferred Device Axial Lead Rectifiers These devices employ the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlap contact. Ideally suited for use as rectifiers in low−voltage, high−frequency inverters, free wheeling diodes, and polarity protection diodes. Features http://onsemi.com Extremely Low vF Low Power Loss/High Efficiency Highly Stable Oxide Passivated Junction Low Stored Charge, Majority Carrier Conduction Pb−Free Packages are Available* SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 50, 60 VOLTS Mechanical Characteristics: Case: Epoxy, Molded Weight: 1.1 Gram (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Cathode indicated by Polarity Band MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol VRRM VRWM VR IO IFSM Max Unit V 50 60 3.0 80 A A AXIAL LEAD CASE 267−05 (DO−201AD) STYLE 1 MARKING DIAGRAM MBR350 MBR360 Average Rectified Forward Current TA = 65°C (RqJA = 28°C/W, P.C. Board Mounting) Non−Repetitive Peak Surge Current (Note 1) (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz, TL = 75°C) Operating and Storage Junction Temperature Range (Reverse Voltage Applie...