AC-DC Open Frame Power Supply
www.DataSheet4U.com
BPW-7010
Industrial Power Supply
100W AC-DC Open Frame Power Supply
20.0
1 TRANSFORMER 7.0
6.02...
Description
www.DataSheet4U.com
BPW-7010
Industrial Power Supply
100W AC-DC Open Frame Power Supply
20.0
1 TRANSFORMER 7.0
6.02
TB1 L H E TB2
0.5
19.0
Features
*Input Voltage: 85~264VAC *Input Frequency: 47~63Hz *Input Current: 3A at 115VAC or 1.5A at 230VAC *Inrush Current: < 30A at 115VAC input or < 60A at 230VAC input, under 24oC cold start *Load Range: With all output at 60% rated load, +5V is between 4.95V and 5.05V. All other outputs are within the accuracy range. Effective so long as the max. load does not exceed 90W continuous convection cooling *Ripple and Noise: Peak to peak ripple and noise for each output is < 1% of each output's voltage at rated load *Line Regulation: < +/-1% for rated load with +/-10% change in input voltage *Load Regulation: < +/-1% for +5V and < +/-5% for all other outputs *Hold Up Time: > 16ms at 115VAC input and rated load *Efficiency: > 70% measured at nominal line and rated load *Altitude: > 10,000 feet *Protection: Built-in crowbar circuit. Trip point is between 5.7~7V. AC line off and on cycle for over voltage recovery and restart hiccup mode protection against short circuit or over load condition *Temperature: 0~50oC forced air 30CFM needed when output > 80W (operating); -40~+85oC (storage) *Connectors: AC Input: Molex 5273-05A withdraw 2-pin or equivalent device DC Output: Molex 5273-12A or equivalent device *Dimensions: 7.0 x 20.0 x 3.8 cm at tolerance +/-0.4mm
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *EMI: FCC class B / EN55022...
Similar Datasheet