Document
www.DataSheet4U.com
UNISONIC TECHNOLOGIES CO., LTD RB751V40
SCHOTTKY DIODES
DIODE
FEATURES
* Miniature surface mounting type * Low forward voltage drop (VF=0.37V Typ. at 1mA) * Low reverse leakage current * Fast switching speed
+ SOD-323
*Pb-free plating product number: RB751V40L
ORDERING INFORMATION
Order Number Normal Lead Free Plating RB751V40-CB2-R RB751V40L-CB2-R Package SOD-323 Packing Tape Reel
RB751V40L-CB2-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel (2) CB2: SOD-323 (3) L: Lead Free Plating , Blank: Pb/Sn
MARKING
5E Lead Plating
www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-022,A
RB751V40
ABSOLUTE MAXIMUM RATINGS (Single Diode @TA=25 )
DIODE
PARAMETER SYMBOL RATINGS UNIT Peak Reverse Voltage VRM 40 V Maximum Reverse Voltage (DC) VR 30 V Mean Rectifying Current IOUT 30 mA Non-repetitive Peak Forward Surge Current IFSM 200 mA 125 Junction Temperature TJ Storage Temperature TSTG -40 ~ +125 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS (TA=25 , unless otherwise specified)
PARAMETER Forward Voltage Reverse Leakage Current Capacitance Between Terminals SYMBOL TEST CONDITIONS VF IF= 1mA IR VR=30V CT VR=1V, f=1MHz MIN TYP MAX 0.37 0.5 UNIT V µA pF
2
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-022,A
RB751V40
TYPICAL CHARACTERISTICS
Forward Characteristics 1000m Typ. pulse measurement 100m 10µ 100µ Reverse Characteristics Ta = 125
DIODE
Ta = 75
Forward Current, IF (A)
10m
12 5 =
Reverse Current, IR (A)
Ta = 75
1µ Ta = 25 100n
1m
Ta
100µ
Ta = 25 Ta = -25
10µ
10n
Ta = -25 Typ. pulse measurement
1µ
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1n 0 5 10 15 20 25 30 35 Reverse Voltage, VR (V)
Fonward Voltage, VF (V)
Capacitance Between Terminals Characteristics 100
Capacitance Between Terminals, CT (pF)
50
Ta = 25 f = 1MHz
20 10 5
2
1 0 2 4 6 8 10 12 Reverse Voltage, VR (V)
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-022,A
.