Power-Over-Ethernet Module
www.DataSheet4U.com
V2.4 Dec 2006 Data Sheet
Silver
TELECOM
Pb
Ag9000-S
Power-Over-Ethernet Module 1. Features
IEEE80...
Description
www.DataSheet4U.com
V2.4 Dec 2006 Data Sheet
Silver
TELECOM
Pb
Ag9000-S
Power-Over-Ethernet Module 1. Features
IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low output ripple and noise Input voltage range 36V to 60V Only one low cost external decoupling capacitor required Overload and short-circuit protection Adjustable Output High efficiency DC/DC converter 1500V isolation (input to output) Silver Telecom “design-in” assistance
2. Description
The Ag9000-S series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. IEEE 802.3af allows for two power options for Category 5 cables and the Ag9000-S series have two pairs of power inputs pins: - VA1&2 and VB1&2 to accommodate this, see Figure 1. The Ag9000-S signature and control circuit provides the PoE compatibility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 15W power to the port. The Ag9000 is compatible with Class 0 to Class 3 equipment. The high efficiency DC/DC converter operates over a wide input voltage range and provides a regulated low ripple and low noise output. The DC/DC converter also has built-in overload and short-circuit output protection.
© Silver Telecom 2006
V2.4 Dec 2006 Data Sheet
Ag9000-S
Power-Over-Ethernet Module
Table of Contents
1. Features....................................................................
Similar Datasheet