DatasheetsPDF.com

LTC2436-1 Dataheets PDF



Part Number LTC2436-1
Manufacturers Linear Technology
Logo Linear Technology
Description 2-Channel Differential Input 16-Bit No Latency DS ADC
Datasheet LTC2436-1 DatasheetLTC2436-1 Datasheet (PDF)

www.DataSheet4U.com LTC2436-1 2-Channel Differential Input 16-Bit No Latency ∆Σ ADC FEATURES s s s DESCRIPTIO s s s s s s s s s 2-Channel Differential Input with Automatic Channel Selection (Ping-Pong) Low Supply Current: 200µA, 4µA in Autosleep Differential Input and Differential Reference with GND to VCC Common Mode Range 0.12LSB INL, No Missing Codes 0.16LSB Full-Scale Error and 0.006LSB Offset 800nV RMS Noise, Independent of VREF No Latency: Digital Filter Settles in a Single Cycle an.

  LTC2436-1   LTC2436-1



Document
www.DataSheet4U.com LTC2436-1 2-Channel Differential Input 16-Bit No Latency ∆Σ ADC FEATURES s s s DESCRIPTIO s s s s s s s s s 2-Channel Differential Input with Automatic Channel Selection (Ping-Pong) Low Supply Current: 200µA, 4µA in Autosleep Differential Input and Differential Reference with GND to VCC Common Mode Range 0.12LSB INL, No Missing Codes 0.16LSB Full-Scale Error and 0.006LSB Offset 800nV RMS Noise, Independent of VREF No Latency: Digital Filter Settles in a Single Cycle and Each Channel Conversion is Accurate Internal Oscillator—No External Components Required 87dB Min, 50Hz and 60Hz Notch Filter Narrow SSOP-16 Package Single Supply 2.7V to 5.5V Operation Pin Compatible with the 24-Bit LTC2412 The LTC®2436-1 is a 2-channel differential input micropower 16-bit No Latency ∆ΣTM analog-to-digital converter with an integrated oscillator. It provides 0.5LSB INL and 800nV RMS noise independent of VREF. The two differential channels convert alternately with a channel identification included in the conversion result. It uses delta-sigma technology and provides single conversion settling of the digital filter. Through a single pin, the LTC2436-1 can be configured for better than 87dB input differential mode rejection at 50Hz and 60Hz ± 2%, or it can be driven by an external oscillator for a user defined rejection frequency. The internal oscillator requires no external frequency setting components. The converter accepts any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement configurations. The fullscale differential input range is from – 0.5 •␣ VREF to 0.5 • VREF. The reference common mode voltage, VREFCM, and the input common mode voltage, VINCM, may be independently set anywhere between GND and VCC. The DC common mode input rejection is better than 140dB. The LTC2436-1 communicates through a flexible 3-wire digital interface which is compatible with SPI and MICROWIRETM protocols. , LTC and LT are registered trademarks of Linear Technology Corporation. No Latency ∆Σ is a trademark of Linear Technology Corporation. MICROWIRE is a trademark of National Semiconductor Corporation. U APPLICATIO S s s s s s s s s Direct Sensor Digitizer Weight Scales Direct Temperature Measurement Gas Analyzers Strain-Gage Transducers Instrumentation Data Acquisition Industrial Process Control TYPICAL APPLICATIO 5V REF 1µF 4.9k (100mV) 100Ω 1 2 4 VCC + EFFECTIVE RESOLUTION (µV)* FO 14 REF CH0+ LTC2436-1 CH0– REF – CH1 + = EXTERNAL CLOCK SOURCE = INTERNAL OSC/SIMULTANEOUS 50Hz/60Hz REJECTION 50 40 30 20 10 0 0 5 4 3 2 VREF (V) 24361 TA02 *COMBINES EFFECTS OF PEAK-TO-PEAK NOISE AND 16-BIT STEP SIZE (VREF/216) 1 5 THERMOCOUPLE 3 6 7 8, 9, 10, 15, 16 SCK SDO CS 13 12 11 3-WIRE SPI INTERFACE CH1– GND 24361 TA01 U Effective Resolution vs VREF 90 80 70 60 U 24361f 1 LTC2436-1 ABSOLUTE (Notes 1, 2) AXI U RATI GS U U W PACKAGE/ORDER I FOR ATIO TOP VIEW VCC REF + REF – CH0+ CH0– CH1.


LTC2412 LTC2436-1 LTC2430


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)