The detection of Methane
www.DataSheet4U.com
FIGARO
PRODUCT INFORMATION
TGS 2611 - for the detection of Methane
Features:
* Low power consumpt...
Description
www.DataSheet4U.com
FIGARO
PRODUCT INFORMATION
TGS 2611 - for the detection of Methane
Features:
* Low power consumption * High sensitivity to methane * Long life and low cost * Uses simple electrical circuit
Applications:
* Domestic gas alarms * Portable gas detectors * Gas leak detector for gas appliances
The sensing element is comprised of a metal oxide semiconductor layer formed on an alumina substrate of a sensing chip together with an integrated heater. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration. The TGS 2611 has high sensitivity and selectivity to methane gas. Due to its low sensitivity to alcohol vapors (a typical interference gas in the domestic environment), the sensor is ideal for domestic gas alarms. Due to miniaturization of the sensing chip, TGS 2611 requires a heater current of only 56mA and the device is housed in a standard TO-5 package. The figure below represents typical sensitivity characteristics, all data having been gathered at standard test conditions (see reverse side of this sheet). The Y-axis is indicated as sensor resistance ratio (Rs/Ro) which is defined as follows: Rs = Sensor resistance in displayed gases at various concentrations Ro = Sensor resistance in 5000ppm of methane Sensitivity Characteristics:
100
The figure below represents t...
Similar Datasheet