LEDRS75N

www.DataSheet4U.com LED Highly-Diffused Lights (75 mm) Features Designed to minimize surface textures and elevation changes, while providing uniform illumination over the field of view 59 mm x 75 mm light aperture The suggested field of view is 38 mm in diameter and the suggested stand off is 25 mm Black anodized aluminum housing LED Highly-Diffused Light Models Models Illumination Type Color Cable Supply Voltage Supply Current Connections Pin 1 = +V fan Pin 2 = dc common fan Pin 3 = dc common Pin 4 = +V Power supply model PSA-12(E) or PS2V-12(E) is recommended (see other side) Pin 4 or 5 = +V Pin 1 or 6 = dc common Use strobe control module model SCM (see other side) LEDRS75N† Continuous highly-diffused light LEDGS75N† Red 640 nm Green 530 nm 0.5 m (18") terminated with 9-pin D-sub connector (male pins) 980 mA max. 12V dc ±10% with voltage regulation of ±1% 1.0 A max. LEDRS75N-S† Strobed highly-diffused light Red 640 nm 1.8 m (6') terminated with 9-pin D-sub connector (male pins) 24V dc ±10% with voltage regulation of ±1% 7.0 A max. 1 ms pulse † These models are not stocked and are non-returnable. Useful Life Environmental Rating Operating Conditions Green model: 50,000 hours; Red models: 60,000 hours. Note: actual useful life of strobed lights depends on duty cycle IEC IP20; NEMA 1 Temperature: 0° to 40°C (+32° to 104°F) Maximum relative humidity: 95% at 40°C (non-condensing) 82.6 mm 75 mm (3.25") (2.95") Light Aperture 25.4 mm (1.00") 25.4 mm (1.00...