Triple 750 MHz Voltage Feedback Op Amp
NCS2540
Triple 750 MHz Voltage Feedback Op Amp with Enable Feature
NCS2540 is a triple 750 MHz voltage feedback monolit...
Description
NCS2540
Triple 750 MHz Voltage Feedback Op Amp with Enable Feature
NCS2540 is a triple 750 MHz voltage feedback monolithic operational amplifier featuring high slew rate and low differential gain and phase error. The voltage feedback architecture allows for a superior bandwidth and low power consumption. This device features an enable pin.
Features
−3.0 dB Small Signal BW (AV = +2.0, VO = 0.5 Vp−p) 750 MHz Typ Slew Rate 1700 V/ms Supply Current 13 mA/amp Input Referred Voltage Noise 5.0 nV/ǸHz THD −64 dBc (f = 5.0 MHz, VO = 2.0 Vp−p) Output Current 100 mA Enable Pin Available These are Pb−Free Devices
Applications
Line Drivers Radar/Communication Receivers
3
0
−3 VOUT = 2.0 VPP
−6 −9 −12 −15
1k
VOUT = 1.0 VPP
VOUT = 0.5 VPP
Gain = +2 VS = ±5V RF = 150W RL = 150W
10k 100k 1M 10M 100M FREQUENCY (Hz)
1G
Figure 1. Frequency Response: Gain (dB) vs. Frequency Av = +2.0
10G
http://onsemi.com
MARKING DIAGRAM
16
1 TSSOP−16 DT SUFFIX CASE 948F
NCS 2540 ALYWG
G
2540 = NCS2540 A = Assembly Location L = Wafer Lot Y = Year W = Work Week
G = Pb−Free Package (Note: Microdot may be in either location)
TSSOP−16 PINOUT
−IN1 +IN1
VEE1 −IN2
+IN2 VEE2 −IN3 +IN3
1 2 3 4 5 6 7 8
− +
− +
− +
16 VCC1 15 OUT1
14 EN 13 VCC2 12 OUT2 11 VCC3 10 OUT3 9 VEE3
(Top View)
ORDERING INFORMATION
Device
Package
Shipping†
NCS2540DTBG
TSSOP−16 96 Units / Rail (Pb−Free)
NCS2540DTBR2G TSSOP−16 2500 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,...
Similar Datasheet