DatasheetsPDF.com

MCS3AT Dataheets PDF



Part Number MCS3AT
Manufacturers Laser
Logo Laser
Description 3-element colour sensor
Datasheet MCS3AT DatasheetMCS3AT Datasheet (PDF)

www.DataSheet4U.com DATA-SHEET MCS3AT/BT 3-element colour sensor – TO5 FUNCTION The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitised with dielectr.

  MCS3AT   MCS3AT


Document
www.DataSheet4U.com DATA-SHEET MCS3AT/BT 3-element colour sensor – TO5 FUNCTION The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitised with dielectric spectral filter for its colour range, preferably for the primary colours red, green and blue. APPLICATION • • • • Quality control Monitoring the production Control of manufacturing Detection of colour marks FEATURES Dielectric filters guaranties the good optical properties of the colour sensors, such as: − high transmission − slight aging of the filter − high temperature stability − high signal frequency − reduced cross talk − small size (diameter of the optical sensitive surface ca. 2 mm) CONSTRUCTION • • • • 3 on chip integrated PIN photo diodes different package versions dielectric filters for the three colour ranges: red, green and blue (TO5, with/without IR-blocked) Electrical connections − three anodes − one common cathode Distributor: Laser Components Instrument Group, Wilmington MA, Phone: 978 658 9100, www.laser-components.com The information disclosed herein was originated by and is the property of MAZeT. MAZeT reserves all patent, proprietary, design, use, sales, manufacturing an reproduction rights thereto. Product names used in this publication are for identification purposes only and may be trademark of their respective companies. REVISIONS REV. DESCRIPTION 1 V1.6 APPROVED 2001/02/21 MAXIMUM RATINGS / CHARACTERISTICS (TA = 25°C; per single diode) Description Diameter of the light sensitivity area Light sensitivity area per element Photo sensitivity of colour ranges Symbol D A Smax λB λG λR VR IR C tr, tf NEP ϕ Top Tst fR = 100 Hz ∆λ(Filter) < 1%*λ 0...3,5V VR = 5V VR = 5V λB = 470 nm λG = 570 nm λR = 650 nm Condition typ. Value 2,0 0,85 0,26 0,33 0,41 (0,25) 400 - 510 490 - 610 590 - 750 2,5 <100 50 <1 <10 1 8 0 ... +70 -20 ... +80 -13 Unit mm mm² A/W Field of the spectral sensitivity ± 2%*λ Reverse Voltage Dark current Terminal Capacitance Rise and fall time of the photocurrent Noise equivalent power Crosstalk Angle of incidence nm V pA pF µs W/√Hz % Grad °C °C Operating temperature range Storage temperature range CHARACTERISTIC CURVE 1.1 Typical spectral sensitivity of the 3-element colour sensor (MCS3AT) 0,4 Magnitude (A/W) 0,3 0,2 0,1 0,0 375 425 475 525 575 625 675 725 775 W ave le n g th (n m ) red green blue 1.2 Typical spectral sensitivity of the 3-element colour sensor with IR-blocking (MCS3BT) 0,4 Magnitude (A/W) 0,3 0,2 0,1 0,0 375 425 475 525 575 625 675 725 red green blue 775 W a ve length (nm ) Page 2 of 4 D Distributor: Laser Components Instrument Group, Wilmington MA, Phone: 978 658 9100, www.laser-components.com PACKAGE OVERVIEW 0,40 mm 1,20 mm 10,0 mm 2,60 mm 4,00 mm 0,20 mm 8,34 mm 6,35 mm 9,20 mm 7,60 mm 5,10 mm 6,50 mm 0,40 mm 1,20 mm TO5 with transparent encapsulated plastic (MCS3AT) 9,20 mm 7,60 mm TO5 with windows cap (MCS3BT) Page 3 of 4 D Distributor: Laser Components Instrument Group, Wilmington MA, Phone: 978 658 9100, www.laser-components.com 5,10 mm 10,0 mm 2,60 mm PIN-CONFIGURATION (Top view) K PIN 1 2 3 K description A1 red A2 blue A3 green common cathode A3 A1 A2 TO5-package APPLICATION CIRCUIT Opposite figure shows a circuit for the conversion of photo current to an equivalent voltage. These voltage can be processed e.g. with an ADC. By the selection of suitable resistors the output voltage range can be adjusted to the photo current value. (for example the pin-programmable transimpedance amplifier MTI04 with the resistors 25kΩ, 500kΩ VOut and 5MΩ) Ired MAZeT R1 Vred R2 +VR Igreen Vgreen MCS3 Iblue R3 Vblue Rx ≈ I Photo MTI04 APPLICATION NOTE It is recommended to use an IR-block filter > 720nm (MCS3BT) or a light source with low infrared radiation for optimal operations of the colour sensor. ORDERING INFORMATION Colour sensor as Die Colour sensor with TO5-package, transparent encapsulated (plastic) Colour sensor with TO5-package, with top and IR-blocking windows Evaluation board for JENCOLOUR sensors MCS3 MCS3AT MCS3BT MCS-EB1 For more detailed information please contact: LASER COMPONENTS GmbH Werner-von-Siemens-Str. 15 D-82140 Olching / Germany Telefon + 4 9 (0) 81 42 / 28 64 0 Telefax + 4 9 (0) 81 42 / 28 64 11 E-Mail: [email protected] www.lasercomponents.com LASER COMPONENTS Instrument Group, Inc. 10 Upton Drive USA 01887 Wilmington, MA Phone: +1 978 6589 100 Fax: +1 978 6581 888 E-Mail: [email protected] www.laser-components.com Page 4 of 4 D Issue: 04/02 / V2 / pdf / mazet.pdf / mcs3at_b.pdf .


MCS3AO MCS3AT MCS3BT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)