SAW Filter
www.DataSheet4U.com
China Electronics Technology Group Corporation No.26 Research Institute
160MHz SAW Filter 9MHz Ban...
Description
www.DataSheet4U.com
China Electronics Technology Group Corporation No.26 Research Institute
160MHz SAW Filter 9MHz Bandwidth
Part Number:LBT16034
www.sipatsaw.com
SIPAT Co., Ltd.
Specifications
Parameter Center Frequency
Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation(f0±4.375MHz) Absolute Delay Group Delay Variation(f0±4.375MHz) Ultimate Rejection Material Temperature coefficient Ambient Temperature Package Size
Unit
MHz dB MHz MHz MHz MHz dB usec
Minimum
159.9 8.95 9.25 -
Typical
160 25.8 9.05 9.4 10.56 10.71 0.8 3.1 60
Maximum
160.1 30 10.8 1.0 100
nsec dB
KHz/°C °C
50
56 -2.88 25
-
DIP3512 (35.2x12.7x5.2mm3)
Notes:
1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show
Matching Configuration
L1=22nH
L2=15nH
C1=33pF Source/Load Impedance=50 ohm
Notes - Component values may change depending on board layout.
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
LBT16034 2005-12-15 1.0 Page 1/3
Phone: +86-23-62920684
Fax: +86-23-62805284
www.sipatsaw.com / sawmkt@sipat.com
China E...
Similar Datasheet