LB140DS22

www.DataSheet4U.com China Electronics Technology Group Corporation No.26 Research Institute 140MHz Low-loss SAW Filter 0.55MHz Bandwidth Part Number: LB140DS22 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation Absolute Delay Phase Linearity (f0±250KHz) Group Delay Variation (f0±250KHz) Ultimate Rejection f0±2.5MHz f0±20MHz Subatrate Material Ambient Temperature Package Size °C dB dB 37 40 41 45 Quartz 25 SF－26 - Unit MHz dB MHz MHz MHz dB usec Minimum 139.96 0.48 - Typical 140 10.2 0.55 0.86 1.98 0.3 1.88 0.8 Maximum 140.04 12 2.10 0.6 - deg nsec - 80 200 Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration L1 L2 L1=82nH C1=56pF C2 L2=100nH C2=47pF C1 Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. LB140DS22 2005-4-26 1.0 Page 1/3 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / saw...