LB061DS12

www.DataSheet4U.com China Electronics Technology Group Corporation No.26 Research Institute 70MHz SAW Filter 7.2MHz Bandwidth Part Number: LB070DS12 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 30 dB Bandwidth Passband Variation Phase Linearity（F0± 3MHz） Group delay Variation（F0±3MHz） Ultimate Rejection 78MHz~95MHz 45MHz~63MHz Absolute Delay Material Temperature coefficient Ambient Temperature Package Size dB 38 47 40 50 1.03 -6.58 25 - Unit MHz dB MHz MHz MHz dB degree nsec Minimum 69.8 6.2 7 - Typical 70 7.5 6.23 7.22 10.4 0.8 7 60 Maximum 70.2 8.5 10.6 1 10 125 usec KHz/°C °C - SMP-53 (13.3 x 6.5 mm Nominal Footprint) Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration L1=120nH L2=150nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. LB070DS12 2005-7-18 1.0 Page 1/3 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com...