RMS Responding Detector
www.DataSheet4U.com
PRELIMINARY TECHNICAL DATA
FEATURES
True rms response Excellent temperature stability Up to 30 dB i...
Description
www.DataSheet4U.com
PRELIMINARY TECHNICAL DATA
FEATURES
True rms response Excellent temperature stability Up to 30 dB input dynamic range at 4 GHz 50 Ω input impedance 1.25 V rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply RoHS Compliant
50 MHz to 4 GHz TruPwr™ Detector ADL5501
FUNCTIONAL BLOCK DIAGRAM
ADL5501
RFIN x2 i
INTERNAL FILTER CAPACITOR
VPOS FLTR
TRANSCONDUCTANCE CELLS x2 i
ERROR AMP BUFFER 100 Ω VRMS
APPLICATIONS
Measurement of CDMA, CDMA2000, W-CDMA, and QPSK/QAM-based OFDM, and other complex modulation waveforms RF transmitter or receiver power measurement
BAND-GAP REFERENCE
ENBL COMM
Figure 1.
GENERAL DESCRIPTION
The ADL5501 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 4 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally ac-coupled and has a nominal input impedance of 50 Ω. The output is a linear-responding dc voltage with a conversion gain of 6.6 V/V rms at 900 MHz. The ADL5501 is intended for true power measurement of simple and complex waveforms. The device is particularly useful for measuring high crest factor (high peak-to-rms ratio) signals, such as CDMA, CDMA2000, W-CDMA, and QPSK/QAM-based OFDM waveforms. The on-chip modulation filter provides adequate averaging for most waveforms. The on-chip, 100 Ω series resistance at the output...
Similar Datasheet