DatasheetsPDF.com

MAX13027 Dataheets PDF



Part Number MAX13027
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators
Datasheet MAX13027 DatasheetMAX13027 Datasheet (PDF)

www.DataSheet4U.com 19-3266; Rev 1; 8/04 +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators General Description The MAX13013–MAX13017/MAX3023–MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side.

  MAX13027   MAX13027


Document
www.DataSheet4U.com 19-3266; Rev 1; 8/04 +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators General Description The MAX13013–MAX13017/MAX3023–MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side of the device, and vice-versa. The MAX13013 single-, the MAX13014–MAX13017 dual-, and the MAX3023–MAX3028 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023–MAX3028 (TSSOP package) quad-level translators feature EN and EN inputs. When disabled, each device places all inputs/outputs on both sides in tri-state and reduces the VCC supply current to 0.03µA, and the VL supply current to 0.1µA. These devices operate at a guaranteed 100Mbps data rate for VL > 1.8V. The MAX13013–MAX13017/MAX3023–MAX3028 accept a +1.65V to +3.6V VCC voltage and a +1.2V to (VCC 0.4V) VL voltage, making them ideal for data transfer between low-voltage ASICs/programmable logic devices (PLDs) and higher voltage systems. The MAX13013 is available in 3 x 2 UCSP and 6-pin SC70 packages. The MAX13014–MAX13017 are available in 3 x 3 UCSP and 8-pin SOT23 packages. The MAX3023–MAX3028 are available in 4 x 3 UCSP and 14-pin TSSOP packages. All devices operate over the extended -40°C to +85°C temperature range. Features ♦ 100Mbps Guaranteed Data Rate ♦ Bidirectional Level Translation MAX13013 (Single) MAX13014 (Dual) MAX3023 (Quad) ♦ Unidirectional Level Translation MAX13015/MAX13016/MAX13017 (Dual) MAX3024–MAX3028 (Quad) ♦ VL Operation Down to +1.2V ♦ Ultra-Low 0.1µA Supply Current When Disabled ♦ Low-Quiescent Current (0.1µA) ♦ UCSP, SC70, SOT23, and TSSOP Packages MAX13013–MAX13017/MAX3023–MAX3028 Pin Configurations TOP VIEW VCC 1 6 EN A VCC GND 2 I/O VCC1 GND 1 2 3 MAX13013 5 VL B MAX13013 VL I/O VL1 EN I/O VCC1 3 4 I/O VL1 SC70 3 x 2 UCSP TOP VIEW (BUMPS ON BOTTOM OF DIE) Typical Operating Circuit +1.8V 0.1µF 0.1µF +3.3V Applications CMOS Logic-Level Translation Low-Voltage ASIC Level Translation Cell Phones SPI™, MICROWIRE™ Level Translation Portable POS Systems Portable Communication Devices GPS Telecommunications Equipment +1.8V SYSTEM CONTROLLER CLK DATA GND VL VCC +3.3V SYSTEM MAX13014 I/O VL1 I/O VL2 I/O VCC1 I/O VCC2 GND CLK DATA GND Ordering Information/Selector Guide PART MAX13013EXT TEMP RANGE -40°C to +85°C PIN-PACKAGE 6 SC70 PACKAGE CODE — TOP MARK ACD NUMBER OF VL → VCC TRANSLATORS 1 Number of VCC → VL TRANSLATORS 1 EN ✓ EN — MICROWIRE is a trademark of National Semiconductor Corp. SPI is a trademark of Motorola, Inc. UCSP is a trademark of Maxim Integrated Products, Inc. Pin Configurations continued at end of data sheet. Ordering Information/Selector Guide continued at end of data sheet. 1 ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators MAX13013–MAX13017/MAX3023–MAX3028 ABSOLUTE MAXIMUM RATINGS All voltages are referenced to GND. VCC ...........................................................................-0.3V to +4V VL...........................................................................................-0.3V to +4V I/O VCC_......................................................-0.3V to (VCC + 0.3V) I/O VL_ ...........................................................-0.3V to (VL + 0.3V) EN, EN ...........................................................-0.3V to (VL + 0.3V) Short-Circuit Duration I/O VL_, I/O VCC_ to GND ....................................................Continuous Continuous Power Dissipation (TA = +70°C) 6-Pin SC70 (derate 3.1mW/°C above +70°C) ..............245mW 6-Bump UCSP (derate 3.9mW/°C above +70°C).........308mW 8-Bump UCSP (derate 4.7mW/°C above +70°C).........379mW 8-Pin SOT23 (derate 9.1mW/°C above +70°C)............727mW 12-Bump UCSP (derate 6.5mW/°C above +70°C) ...518.8mW 14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW Operating Temperature Range ...........................-40°C to +85°C Junction Temperature ......................................................+150°C Storage Temperature Range ............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect .


MAX13026 MAX13027 MAX13028


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)