PLC Powerline DAA IC
www.DataSheet4U.com
Agilent HCPL-800J PLC Powerline DAA IC
Data Sheet
Features • -60 dB Overall Tx Distortion • 25 nV/ ...
Description
www.DataSheet4U.com
Agilent HCPL-800J PLC Powerline DAA IC
Data Sheet
Features -60 dB Overall Tx Distortion 25 nV/ Hz Typical Input Referred Noise Load Detection Function Description The HCPL- 800J is a galvanically isolated Powerline Data Access Arrangement IC. It provides the key features of isolation, Tx line driver and Rx amplifier as required in a powerline modem application. Used together with a simple LC coupling circuit, the HCPL- 800J offers a highly integrated, cost effective Analogue Front End (AFE) solution. Optical coupling technology provides very high isolation mode rejection, facilitating excellent EMI and EMC performance. Application robustness is enhanced by the Connection Diagram
TX-EN TX Powerline Transceiver IC (ENDEC) RX STATUS VCC1 1 2 3 4 5 6 7 8 Tx-en Tx-in Rx-PD-out Rx-Amp-in Status Rx-out VCC1 GND1 HCPL-800J N GND1 GND2 GND2 GND2 Tx-out VCC2 Tx-PD-out Tx-LD-in Cext Rx-in Rref 16 15 14 13 12 11 10 9 Filter GND2 Filter L VCC2 GND2
inherent properties of optoisolation devices, to effectively block the transfer of damaging surge transients. Excellent transmitter performance is achieved with the use of a high efficiency, low distortion line driver stage. Transmitter robustness is further enhanced with integrated load detection and over- temperature protection functions. The HCPL- 800J is designed to work with various transceiver ICs and significantly simplify the implementation of a powerline modem.
Under-Voltage Detection Over-Temperature S...
Similar Datasheet