MAX9178

www.DataSheet4U.com 19-2856; Rev 0; 4/03 Quad LVDS Line Driver with High-ESD Tolerance and Flow-Through Pinout General Description The MAX9178 quad low-voltage differential signaling (LVDS) line driver with high-ESD tolerance is ideal for applications requiring high data rates and low power with reduced noise. The MAX9178 is guaranteed to transmit data at speeds up to 400Mbps (200MHz) over controlled impedance of media of approximately 100Ω. The transmission media can be printed circuit (PC) board traces, backplanes, or cables. The MAX9178 accepts four LVTTL/LVCMOS inputs and translates them to LVDS output signals. All inputs tolerate overshoot of VCC +1V and undershoot of -1V. The EN and EN inputs are ANDed together and control the high-impedance outputs. When the device is disabled, power drops to ultra-low 12.6mW (typ). Outputs conform to the ANSI TIA/EIA-644 LVDS standard. The MAX9178 operates from a single +3.3V supply, and is available in a 16-pin TSSOP and 16-pin thin QFN package with exposed pad. The MAX9178 is specified for operation from -40°C to +85°C. Features o Flow-Through Pinout Simplifies PC Board Layout Reduces Crosstalk o Pin Compatible with DS90LV047A and MAX9123 o Guaranteed 400Mbps Data Rate o Single-Ended Inputs Tolerate 1V Overshoot/Undershoot o 250ps Maximum Pulse Skew o IEC 61000-4-2 Level 4 ESD Tolerance on LVDS Outputs o Conforms to ANSI TIA/EIA-644 LVDS Standard o Single +3.3V Supply MAX9178 Ordering Information PART MAX9178EUE MAX9178ETE TEMP...