DatasheetsPDF.com

AM1N-N Dataheets PDF



Part Number AM1N-N
Manufacturers AIMTEC
Logo AIMTEC
Description 1 watt dc-dc converters
Datasheet AM1N-N DatasheetAM1N-N Datasheet (PDF)

www.DataSheet4U.com AM1N-N Series 1 watt dc-dc converters • • • • 24-PIN DIP PACKAGE LOW PROFILE PLASTIC PACKAGE HIGH EFFICIENCY UP TO 81% UL94-VO PACKAGE • • • INPUT/OUTPUT ISOLATION: 6000VDC OPERATING TEMPERATURE: -40°C ... +85°C PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS DC-DC CONVERTERS GENERAL DESCRIPTION Our AM1N-N series is a family of cost effective 1W single and dual output DC-DC converters. These converters combine plastic package in a 24-pin DIP compatible case with high performa.

  AM1N-N   AM1N-N


Document
www.DataSheet4U.com AM1N-N Series 1 watt dc-dc converters • • • • 24-PIN DIP PACKAGE LOW PROFILE PLASTIC PACKAGE HIGH EFFICIENCY UP TO 81% UL94-VO PACKAGE • • • INPUT/OUTPUT ISOLATION: 6000VDC OPERATING TEMPERATURE: -40°C ... +85°C PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS DC-DC CONVERTERS GENERAL DESCRIPTION Our AM1N-N series is a family of cost effective 1W single and dual output DC-DC converters. These converters combine plastic package in a 24-pin DIP compatible case with high performance feature such as 6000VDC input/output isolation voltage. Twenty four models operate from input voltages of 5, 12 & 24VDC with output voltages of 5, 9, 12, 15, ±5, ±9, ±12, ±15VDC. Operation is specified over the full operating temperature range of -40°C to +85°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage (60 sec) Resistance General Specifications: Efficiency Switching Frequency Physical Specifications Dimensions Weight Case material ±10 % Capacitor 6000 VDC > 1000 MOhm 72% to 81% 35 KHz, typ. 100% load 32.3x14.7x9.4 mm 1.27x0.58x0.37 inches 16 g Plastic UL94-VO Output Specifications: Voltage accuracy Ripple & noise (at 20MHz BW) Short circuit protection Line voltage regulation Load voltage regulation Temperature Coefficient See tolerance envelope graph 75mVp-p, typ. 1 sec. ±1.2%/1% of Vin max. 10%, max. ±0.03%/°C, max. Environmental Specifications: Operating temperature (ambient) -40°C to +85°C Storage temperature -55°C to +125°C Case temperature +95°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection MTBF: > 1,211,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Specifications are subject to change without notification OUTLINE DIMENSIONS & PIN CONNECTIONS Single output Pin 1 2 8,17 10,15 12,13 Function +V Input -V Input N.C. OV +V Output Dual output Pin 1 2 8,17 10,15 12,13 24 23 Function +V Input -V Input -V Output OV +V Output 17 16 15 14 13 8 9 10 11 1 2 24 1 2 TO ORDER CALL 1-888-9-AIMTEC DataSheet 4 U .com www.DataSheet4U.com AM1N-N Series MODELS Single output Models AM1N-0505SH60-N AM1N-0509SH60-N AM1N-0512SH60-N AM1N-0515SH60-N AM1N-1205SH60-N AM1N-1209SH60-N AM1N-1212SH60-N AM1N-1215SH60-N AM1N-2405SH60-N AM1N-2409SH60-N AM1N-2412SH60-N AM1N-2415SH60-N Input Voltage 5V ± 10% Ouput Voltage 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC Ouput Current max. 200mA 111mA 84mA 67mA 200mA 111mA 84mA 67mA 200mA 111mA 84mA 67mA 12V ± 10% 24V ± 10% Dual output Models AM1N-0505DH60-N AM1N-0509DH60-N AM1N-0512DH60-N AM1N-0515DH60-N AM1N-1205DH60-N AM1N-1209DH60-N AM1N-1212DH60-N AM1N-1215DH60-N AM1N-2405DH60-N AM1N-2409DH60-N AM1N-2412DH60-N AM1N-2415DH60-N Input Voltage 5V ± 10% Ouput Voltage 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC Ouput Current max. ±100mA ±55mA ±42mA ±33mA ±100mA ±55mA ±42mA ±33mA ±100mA ±55mA ±42mA ±33mA 12V ± 10% 24V ± 10% TYPICAL CHARACTERISTICS Continued on next page 25 VISIT US AT WWW.AIMTEC.CA DataSheet 4 U .com DC-DC CONVERTERS www.DataSheet4U.com AM1N-N Series APPLICATION NOTE Filtering In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the dc/dc output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees the external capacitor table. To get an extremely low ripple, an “LC” filtering network may be connected to the input and output ends of the dc/dc converter, which may produce a more significant filtering effect. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the dc/dc frequency to avoid mutual interference (see figure 1). DC-DC CONVERTERS Requirement on output load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of dc/dc converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. For single output Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Output Voltage.


AM1L-N AM1N-N AM1P


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)