DatasheetsPDF.com

NC405 Dataheets PDF



Part Number NC405
Manufacturers Noise Com
Logo Noise Com
Description (NC400 Series) UHF/Microwave Mixer Diode
Datasheet NC405 DatasheetNC405 Datasheet (PDF)

www.DataSheet4U.com 0.1 Hz to 110 GHz DataSheet 4 U .com nc100/200/300/400 series 30 NOISE DIODES Noise Com's noise diodes are the fundamental building blocks of all noise systems. They are hand-picked for performance characteristics that make them ideally suited to broadband noise generation with flat response. All Noise Com noise diodes deliver symmetrical white Gaussian noise and flat output power versus frequency. The diodes are burned-in for 168 hours, meet MIL-STD202, and are hermeti.

  NC405   NC405



Document
www.DataSheet4U.com 0.1 Hz to 110 GHz DataSheet 4 U .com nc100/200/300/400 series 30 NOISE DIODES Noise Com's noise diodes are the fundamental building blocks of all noise systems. They are hand-picked for performance characteristics that make them ideally suited to broadband noise generation with flat response. All Noise Com noise diodes deliver symmetrical white Gaussian noise and flat output power versus frequency. The diodes are burned-in for 168 hours, meet MIL-STD202, and are hermetically sealed. Noise Com noise diodes are available in a wide variety of package styles, and in special configurations on request. The NC100 and NC200 Series diodes are designed for audio and RF applications. The NC300 and NC400 Series diodes are designed for microwave applications in which a 50-ohm impedance is required. Typical small signal impedance of the NC300 and NC400 Series is 10-20 ohms when a diode is turned on. Typically the output level is higher at low frequencies with low currents. Driving the diodes with more current results in more output at higher frequencies. General Specifications: Output Operating temperature White Gaussian Noise 0˚C to +55˚C for NC100 series -55˚C to +125˚C for all others Storage temperature -65˚C to +150˚C Specifications subject to change without notice. Applications: • Built-in test equipment (BITE) • Dither circuitry for A/D converters TYPICAL BIAS CIRCUIT CATHODE R + 15V – C RF RL For NC100 Series R = 150K For NC200 Series R = 15K For NC300/400 Series R = Adjust for performance R L= Load resistor For recommended value, see charts on page 31 C≥ 1 2πRL(fc) fc = low frequency cut-off www.noisecom.com www.DataSheet4U.com COMPONENTS 31 CH1 Chip (inches) CH2 Chip (inches) CH3 Chip (inches) NC100-400 SERIES C10 (inches) C50 (inches) C50H (inches) DO-35 Package (inches) MODEL NC101 NC102 NC103 NC104 NC201 NC202 NC203 FREQUENCY RANGE 0.1 Hz - 100 kHz 0.1 Hz - 500 kHz 0.1 Hz - 1 MHz 0.1 Hz - 3 MHz 0.1 Hz - 10 MHz 0.1 Hz - 25 MHz 0.1 Hz - 100 MHz AUDIO & VHF TYPES OPERATING CONDITIONS MINIMUM OUTPUT Vb (V) Iop RL (Ω) (µV/√Hz) 7 - 10 7 - 10 7 - 10 7 - 10 7 - 10 7 - 10 7 - 10 30 - 60 µA 30 - 60 µA 30 - 60 µA 30 - 60 µA 0.2 - 0.5 mA 0.2 - 0.5 mA 0.2 - 0.5 mA 2200 2200 2200 2200 2200 2200 50 3.0 3.0 3.0 3.0 0.1 0.1 0.05 PACKAGE DO-35 DO-35 DO-35 DO-35 DO-35 DO-35 DO-35 BL Package (inches) MODEL NC302L NC303 NC305 NC401 NC403 NC404 NC405 NC406 FREQUENCY RANGE 10 Hz - 3 GHz 10 Hz - 8 GHz RF & MICROWAVE TYPES OPERATING CONDITIONS Vb (V) Iop(mA) RL (Ω) 6-8 8 - 12 8 - 12 8 - 12 8 - 12 8 - 12 8 - 12 8 - 12 6 8 10 10 12 15 20 25 50 50 50 50 50 50 50 50 OUTPUT ENR (dB) 30 - 35 30 - 35 29 - 34 30 - 35 24 - 28 20 - 25 15 - 25 15 - 25 PACKAGE DO-35 BL CH1 DO-35 BL CH1 BL CH1 C10 C50H CH2 C50 CH3 C50 CH3 C50 CH3 C50 CH3 10 MHz - 11 GHz 100 MHz - 18 GHz 100 MHz - 27 GHz 18 GHz - 50 GHz 18 GHz - 75 GHz 18 GHz - 110 GHz 1. For chip configuration, add suffix “C”. 2. For beam lead configuration, add suffix “BL”. 3. For C50H configuration, add suffix “H”. DataSheet 4 U .com To order call 201-261-8797 .


PTH9Mxxxxxx NC405 NC406


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)