(KAC-749S / KAC-849) Manual
www.DataSheet4U.com
Troubleshooting Guide
What might appear to be a malfunction in your unit may just be the result of ...
Description
www.DataSheet4U.com
Troubleshooting Guide
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
PROBLEM
No sound. (No sound from one side.) (Blown fuse.)
POSSIBLE CAUSE
Input (or output) cables are disconnected. Protection circuit may be activated. Volume is too high. The speaker cord is shorted.
SOLUTION
Connect the input (or output) cables. Check connections by referring to "Power indicator". Replace the fuse and use lower volume. After check the speaker cord and fixing the cause of the short, replace the fuse. Adjust the control correctly referring to "Controls". Connect them properly checking the + / - of the terminals and wires well. Connect the speaker wire again so that it is not pinched by anything. Set switches properly by referring to "System examples".
KAC-849 KAC-749S
4-CHANNEL POWER AMPLIFIER
The output level is too small (or too large). The sound quality is bad. (The sound is distorted.)
The input sensitivity adjusting control is not set to the correct position. The speakers wire are connected with wrong + / polarity. A speaker wire is pinched by a screw in the car body. The switches may be set improperly.
INSTRUCTION MANUAL
Specifications
Specifications subject to change without notice. Audio Section .....................................................................KAC-849
Max Power Outpu...
Similar Datasheet