1.8GHz Power Amp/Switch
( DataSheet : www.DataSheet4U.com )
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MRFIC1807/D
The MRF...
Description
( DataSheet : www.DataSheet4U.com )
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MRFIC1807/D
The MRFIC Line
1.8 GHz Power Amp/Switch
Designed primarily for use in DECT, Japan Personal Handy System (PHS) and other wireless Personal Communication Systems (PCS) applications. The MRFIC1807 includes a single–stage power amplifier and transmit/receive switch in a low–cost SOIC–16 package. The amplifier portion employs a depletion mode power GaAs MESFET and produces up to +27 dBm output with +19 dBm input. On–chip power control circuitry allows bias adjustment for optimum performance. The T/R switch is capable of handling up to +28 dBm through the transmit path without significant increase in insertion loss. The switch is controlled by CMOS logic level signals — no negative control voltage required. The MRFIC1807 is sized to be driven by the MRFIC1806 Driver/ Ramp IC. Together with the rest of the MRFIC1800 GaAs ICs, this family offers the complete transmit and receive functions, less LO and filters, needed for a typical 1.8 GHz cordless telephone. Usable 1500 – 2200 MHz 8.0 dB Gain Including Switch +26 dBm Minimum Output Power at Antenna Port 1.0 dB Typ RX Path Insertion Loss Simple Off–Chip Matching for Maximum Flexibility 3.0 to 5.0 V Supply No Spurious Outputs for Load VSWR up to 8:1 CMOS Level Switching Signal for T/R Switch Order MRFIC1807R2 for Tape and Reel. R2 Suffix = 2,500 Units per 16 mm, 13 inch Reel. Device Marking = M1807
MRFIC...
Similar Datasheet