(S71PLxxx) STACKED MULTI CHIP PRODUCT FLASH MEMORY AND RAM
S71PL254/127/064/032J based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and RAM 256M/128/64/32 Megabit (16/8/4/2M...
Description
S71PL254/127/064/032J based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and RAM 256M/128/64/32 Megabit (16/8/4/2M x 16-bit) CMOS 3.0 Volt-only Simultaneous Operation Page Mode Flash Memory and 64/32/16/8/4 Megabit (4M/2M/1M/512K/256K x 16-bit) Static RAM/Pseudo Static RAM Datasheet Distinctive Characteristics
MCP Features
Power supply voltage of 2.7 to 3.1 volt High performance — 55 ns — 65 ns (65 ns Flash, 70ns pSRAM) Packages — 7 x 9 x 1.2mm 56 ball FBGA — 8 x 11.6 x 1.2mm 64 ball FBGA — 8 x 11.6 x 1.4mm 84 ball FBGA Operating Temperature — –25°C to +85°C — –40°C to +85°C
ADVANCE
General Description
The S71PL series is a product line of stacked Multi-Chip Product (MCP) packages and consists of:
One or more S29PL (Simultaneous Read/Write) Flash memory die pSRAM or SRAM
The 256Mb Flash memory consists of two S29PL127J devices. In this case, CE#f2 is used to access the second Flash and no extra address lines are required. The products covered by this document are listed in the table below: Flash Memory Density 32Mb 4Mb 8Mb pSRAM Density 16Mb 32Mb 64Mb S71PL032J40 S71PL032J80 S71PL032JA0 S71PL064J80 S71PL064JA0 S71PL064JB0 S71PL127JA0 S71PL127JB0 S71PL127JC0 S71PL254JB0 S71PL254JC0 64Mb 128Mb 256Mb
Flash Memory Density 32Mb SRAM Density (Note) 4Mb 8Mb S71PL032J04 S71PL032J08 S71PL064J08 64Mb
Note: Not recommended for new designs; use pSRAM based MCPs instead.
www.DataSheet4U.com
Publication Number S71PL254/127/064/032J_00 Revision A Amendment 6 Issue Da...
Similar Datasheet