10/100 Fast Ethernet 4 Port Transceiver
STE400P
10/100 FAST ETHERNET 4 PORT TRANSCEIVER
1 GENERAL DESCRIPTION
The STE400P, also referred to as STEPHY4, is a hi...
Description
STE400P
10/100 FAST ETHERNET 4 PORT TRANSCEIVER
1 GENERAL DESCRIPTION
The STE400P, also referred to as STEPHY4, is a high performance Fast Ethernet physical layer interface for 10BASE-T and 100BASE-TX applications. It was designed with advanced CMOS technology to provide a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MAC) and a physical media interface for 100BASETX of IEEE802.3u and 10BASE-T of IEEE802.3. The STE400P supports both half-duplex and full-duplex operation, at 10 and 100 Mbps operation. Its operating mode can be set using auto-negotiation, parallel detection or manual control. It also allows for the support of auto-negotiation functions for speed and duplex detection. 2 FEATURES
PQFP208 ORDERING NUMBER: STE400P
10BASE-T compliant
s s
Support for IEEE802.3x flow control IEEE802.3u Auto-Negotiation support for 10BASE-T and 100BASE-TX MII interface Standard CSMA/CD or full duplex supported
2.1 INDUSTRY STANDARD
s
s s
IEEE802.3u 100BASE-TX and IEEE802.3
Figure 1. BLOCK DIAGRAM FOR 1 PORT
LEDS
LEDS
100Mb/s
TX_CLK TXD[3:0] TX_ER TX_EN
Serial Management
TX Channel
Scrambler Parallel to Serial NRZ To NRZI Encoder
Binary To MLT3 Encoder TRANSMITTER 10/100 10 TX Filter
TXP TXN
4B/5B
10Mb/s
NRZ To Manchester Encoder
Link Pulse Generator
MDIO
Interface / Controller
MDC
REGISTERS
Auto Negotiation
Loopback
Clock Generation
System Clock
RXD[3:0] RX_ER RX_DV RX_CLK
MII
RX Channel 100Mb/s
4B/5B
Descrambler C...
Similar Datasheet