Document
NOTICES
1. The contents stated in this document and the product may be subject to change without prior notice. When you kindly study to use this product, please ask us or our distributor for the latest information.
2. This product is developed and produced for usage onto normal electronic products (office automation equipments, communication peripherals, electric appliance products, game machines, etc.) and is not suitable for applications which need extremely high reliability and extreme safety (aero- or space-use machines, control equipments for nuclear power, life keeping equipments, etc.).
3. This document shall not grant or guarantee any right to adapt intellectual property or any other patents of third party.
4. Please use this product correctly according to operating conditions and precautions for use stated in this document. Please install safety proof in your designing to avoid human accident, fire accident and social damage, which may be resulted from malfunction of this product.
5. This product is not designed to withstand against radiant rays.
6. It is strictly prohibited to copy or publish a part or whole of this document without our prior written approval.
REVISION HISTORY
DATE
REVISION NO.
Aug.7, 02
Ver.1
PAGE -
Initial Release.
DESCRIPTIONS
Tottori SANYO Electric Co., Ltd.
TM150XG-26L10A Ver.1 Page 1/17
MECHANICAL CHARACTERISTICS
ITEM LCD module size Resolution Sub pixel pitch Pixel pitch Active viewing area Bezel opening area Weight
SPECIFICATION
331.6(W) ×254.75(H) ×12.5(T) 1024 × RGB(W) × 768(H) 0.099(W) × 0.297(H) 0.297(W) × 0.297(H) 304.1(W) × 228.1(H) 307.2(W) × 231.1(H) 1220 TYP.
Ta=25 °C
UNIT mm pixel mm mm mm mm
g
ELECTRICAL ABSOLUTE MAXIMUM RATINGS
ITEM Power supply voltage Input voltage CFL lamp current
SYMBOL VDD-VSS
VI IL
MIN -0.3 VSS-0.3
-
MAX 4.0 VDD+0.3 6.5
UNIT V V mA
Ta=25 °C NOTE
ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL CONDITIONS MIN MAX
Ambient
TST Storage
-20 60
temperature
TOP Operation
0 50
Humidity
- Ta=40 °C max. - 85
Vibration Shock
- Storage - Storage
- 1.5 - 50
UNIT °C
%RH
G G
Ta=25 °C NOTE Note 1
No condensation Note 2 Note 3 XYZ 11ms/direction
[ Note 1 ] Care should be taken so that the LCD module may not be subjected to the temperature
beyond this specification.
[ Note 2 ] Ta>40°C: Absolute humidity shall be less than that of 85%RH/40°C.
[ Note 3 ] 10-200Hz, 30min/cycle, X/Y/Z each one cycle and except for resonant frequency.
ELECTRICAL CHARACTERISTICS
VDD=3.3V ,fV=60Hz ,fCLK=65MHz ,Ta=25°C
ITEM
SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE
Power supply voltage VDD-VSS
3.0 3.3 3.6 V
LVDS input threshold voltage
VIH VIL
High level Low level
-100
-
+100 -
mV
VCM=1.2V
LVDS input common Mode voltage
1.0 1.2 1.4 V
LVDS input termination resister
RT
100 Ω Internal
Power Supply current
IDD
Note 1
- (470) 800 mA
[ Note 1 ] Under the following display image :
Typ. value : Display pattern is 256 gray scale bar.
[ Note 2 ] VCM : Common Mode Voltage of LVDS input.
Tottori SANYO Electric Co., Ltd.
TM150XG-26L10A Ver.1 Page 2/17
OPTICAL CHARACTERISTICS
Ta=25ºC, VDD=3.3V, fV=60Hz
ITEM
SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE
Brightness
B φ = 0º
230 300
- cd/m2 Note 5,8
Brightness uniformity
φ = 0º
- - 1.30 - Note 5,6,8
Contrast ratio
CR φ = 0º
300 500
-
- Note 2,4,8
θ = 0º 50 65
-
Viewing angle range
φ
CR>10
θ = 90º θ =180º
60 40
70 55
-
deg.
Note 1,2, 4,8
θ =270º 60 70
-
Response time
Rise Fall
tr tf
φ = 0º
-
20 5
-
ms. Note 3,4,8
Red
x y
- (0.62) - (0.35) -
Color of CIE Green Coordinate Blue
x y x y
φ = 0º
- (0.29) - (0.60) - (0.14) - (0.07) -
- Note 4,8
White
x y
- (0.30) - (0.32) -
θ=180° θ=270°
[ Note 1 ] φ and θ
φ
DATA
Black
White
θ=90°
θ
θ=0°
100%
B 90%
10% 0%
tr
[ Note 3 ] Response time
tf
Black
[ Note 2 ] Contrast ratio "CR" Brightness at White
CR = Brightness at Black
[ Note 4 ] This shall be measured at center point No.3 of Note 7.
[ Note 5 ] The brightness shall be the average of the following 5 points of Note 7.
[ Note 6 ] The brightness uniformity shall be calculated by using following formula.
Maximum brightness of 5 points Brightness uniformity =
Minimum brightness of 5 points
Tottori SANYO Electric Co., Ltd.
TM150XG-26L10A Ver.1 Page 3/17
[ Note 7 ] Measurement points 1/6Hp 1/2Hp 5/6Hp
1/6Vp 1/2Vp 5/6Vp
12 3
45
Active area
Vp: Total Number of Vertical pixel Hp: Total Number of horizontal pixel
[ Note 8 ] Measurement condition
(1) Measurement equipment: BM-5A (TOPCON Corp.), Field=2° (2) Ambient temperature Ta: 25 ± 2°C (3) LCD: All pixels are WHITE, VDD=3.3V, fV=60Hz
(4) Measure after 30 minutes of CFL warm up.
(5) IL=6.0 mArms with the CFL inverter CFP-102 (TORiSAN)
BACKLIGHT CHARACTERISTICS
This module is used the backlight with 4 CFL. Please follow the characteristics of 1 CFL as below.
ITEM Lamp voltage Lamp current Operating frequency Start up voltage Operating life
SYM. CONDITIOS VL IL fL VS tOL
MIN 3 -
50000
TYP.