MX29LV800BT

FEATURES w w Extended single - supply voltage range 2.7V to 3.6V 1,048,576 x 8/524,288 x 16 switchable Single power supply operation - 3.0V only operation for read, erase and program operation Fast access time: 70/90ns Low power consumption - 20mA maximum active current - 0.2uA typical standby current Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x15) Fully compatible with MX29LV800T/B device Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address Erase suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase. Status Reply - Data# polling & Toggle bit for detection of program w .D at h S a t e e 4U . m o c MX29LV800BT/BB 8M-BIT [1Mx8/512K x16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY and erase operation completion. Ready/Busy# pin (RY/BY#) - Provides a hardware method of detecting program or erase operation completion. Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors. CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host sy...