Bi-directional Power/Energy
CS5461A
Single Phase, Bi-directional Power/Energy IC
Features
Description
• Energy Data Linearity: ±0.1% of Reading ...
Description
CS5461A
Single Phase, Bi-directional Power/Energy IC
Features
Description
Energy Data Linearity: ±0.1% of Reading over The CS5461A is an integrated power measure-
1000:1 Dynamic Range
ment device which combines two
On-chip Functions:
analog-to-digital converters, power calculation
- Instantaneous Voltage, Current, and Power
engine, energy-to-frequency converter, and a
- IRMS and VRMS, Apparent and Active (Real) Power - Energy-to-pulse Conversion for Mechanical
Counter/Stepper Motor Drive
- System Calibrations and Phase Compensation
serial interface on a single chip. It is designed to
accurately measure instantaneous current and
voltage, and calculate VRMS, IRMS, instantaneous power, apparent power, and active power
for single-phase, 2- or 3-wire power metering
- Temperature Sensor
applications.
- Voltage Sag Detect
Meets Accuracy Spec for IEC, ANSI, & JIS.
The CS5461A is optimized to interface to shunt resistors or current transformers for current mea-
Low Power Consumption
surement, and to resistive dividers or potential
Current Input Optimized for Sense Resistor.
transformers for voltage measurement.
GND-referenced Signals with Single Supply On-chip 2.5 V Reference (25 ppm/°C typ) Power Supply Monitor Simple Three-wire Digital Serial Interface “Auto-boot” Mode from Serial E2PROM.
The CS5461A features a bi-directional serial interface for communication with a processor, and a programmable energy-to-pulse output function. Addition...
Similar Datasheet