Dual Voltage Comparator
TS2903
Dual Voltage Comparator
Pin assignment: 1. Output 2. Input A (-) 3. Input A (+) 4. Gnd 5. Input B (+) 6. Input B ...
Description
TS2903
Dual Voltage Comparator
Pin assignment: 1. Output 2. Input A (-) 3. Input A (+) 4. Gnd 5. Input B (+) 6. Input B (-) 7. Output B 8. Vcc
Preliminary
Supply Voltage Range 2V to 36V Dual Channel Comparator
General Description
The TS2903 is dual independent precision voltage comparators capable of single-supply or split-supply operation. The specifications as low as 2.0 mV make this device an excellent ground level with single-supply operation. Input offset-voltage selection for many applications in consumer automotive, and It is designed to permit a common mode range-to- industrial electronics. The TS2903 is offered in 8 pin SOP-8 and DIP-8 package.
Features
Output voltage compatible with DTL, ECL, TTL, MOS and CMOS Logic Levels Low input bias current -25nA Low input offset current ±5nA Low input offset voltage ±3mV(max) Input common mode range to ground level Differential lnput voltage range equal to power supply voltage Very low current drain independent of supply voltage - 0.4mA Wide single-supply range 2V to 36V Split-supply range ±1V to ±18V
Block Diagram
Ordering Information
Part No.
TS2903CD TS2903CS
Operating Temp.
o -40 ~ +105 C
Package
DIP-8 SOP-8
Schematic (each comparator)
TS2903
1-6
2005/04 rev. A
Absolute Maximum Rating
Supply Voltage Differential Input Voltage Input Common Mode Voltage Range Input Current (note 2) Output Short Circuit to Ground Output Sink Current (note 1) Power Dissipation @ Ta=25 oC Derate above 25 C Operat...
Similar Datasheet